Rattling 8910 remote

dominoman · Post by **dominoman** » Mon Oct 22, 2007 2:31 pm

My URC 8910 was rattling for some time so I decided to open it up to investigate. The O ring was loose does anybody know what it is for?? The remote seems to work fine without it.

Link to jpg below
http://img219.imageshack.us/my.php?imag ... oteup1.jpg

Evan_s · Post by **Evan_s** » Mon Oct 22, 2007 2:46 pm

Pretty sure thats for the Phone or Wav upgrade process. Not needed really if your doing jp1 upgrades.

dominoman · Post by **dominoman** » Tue Oct 23, 2007 3:47 am

Ah OK that makes sense. Now does anybody know where I need to solder the tiny wires back to to get it working again.??

Zellarman · Post by **Zellarman** » Sun Nov 04, 2007 7:44 am

That donut looking wire coil is definitely the modem for over the phone upgrades only. You really don't have to worry about soldering any of it's connections back if you're a JP-1 er.

Post by **The Robman** » Sun Nov 04, 2007 11:30 am

Like others have said, the ring is indeed the modem and it's not needed when you're programming the remote using JP1. However, if you want to re-attach it, just to make the remote whole again, first notice that there are two small spikes on the ring that line up with holes in the PCB. Also notice that there is a groove in the ring which is where the two wires are supposed to come through.

The two spots where the wires need to be re-soldered are clearly visible in the picture you posted, they are at the 12 o'clock position inside the ring in your picture.

To fix the ring itself back into position, use hot glue.

dominoman · Post by **dominoman** » Mon Nov 05, 2007 10:47 am

Thanks folks. I do Indeed program it using JP1. But as rob said I would like to make it whole again.

Chevar18 · Post by **Chevar18** » Fri Dec 07, 2007 10:53 pm

dominoman wrote:My URC 8910 was rattling for some time so I decided to open it up to investigate. The O ring was loose does anybody know what it is for?? The remote seems to work fine without it.

Link to jpg below
http://img219.imageshack.us/my.php?imag ... oteup1.jpg

This is what happen to me a long time ago and I opened it and did the unthinkable threw the modem away..
So back to square 1. Besides me ordering the cable or trying to build one is there anywhere that I could try locally that might have have a serial JP1 cable. I live in South Florida......

irs009 · Post by **irs009** » Sun Dec 09, 2007 12:30 pm

Chevar,

You'll not find one locally. Look at Marketplace in these fora to see where you might order one.

Jack

JP1 Remotes

Rattling 8910 remote

Rattling 8910 remote

Re: Rattling 8910 remote