View previous topic :: View next topic |
Author |
Message |
JezzaT
Joined: 13 Aug 2007 Posts: 2
|
Posted: Fri Sep 21, 2007 8:03 am Post subject: Discrete input codes for Philips TV - 32PW9527 |
|
|
1. Device: Philips 32PW9527
2. Type of device: TV
3. Year: 2003
4. JP1/UEI Remote model: URC-7562 B00
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes, TV0054, TV0690, TV0556
10. Learning remote question? n/a. No Button on Original Remote.
I'm looking for discrete video input codes AV 1-4 and side
I used this upgrade -TV1054
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=953
The discrete power works fine but the discrete inputs do nothing, EFC-178 does brings up a list off all the inputs though.
I can simulate with macro's but its pretty slow
I found pronto files for this tv but neither of them had discretes
Some else has also looked for them:
http://www.remotecentral.com/cgi-bin/mboard/rc-discrete/thread.cgi?keywords=1500&highlight=9527
any clues or am I out of luck?
Thanks Jeremy |
|
Back to top |
|
|
irs009
Joined: 14 May 2006 Posts: 99
|
Posted: Wed Sep 26, 2007 8:36 am Post subject: |
|
|
Try these in the order listed. They work on my 1 year old Philips TV.
56
130
210
194
226
138
253
29
188
Good luck, Jack |
|
Back to top |
|
|
JezzaT
Joined: 13 Aug 2007 Posts: 2
|
Posted: Thu Sep 27, 2007 6:05 am Post subject: |
|
|
Great - I had partial success - code 226 gave me AV1.
That code is set to AV4 in 1054 upgrade I use so I should of found it myself.
130 and 194 gave me the AV menu, the rest did nothing.
226 did not turn the TV on alas - is that everyone else's experience with Philips discrete input codes?
Thanks for that
Jeremy _________________ Jeremy D Thomas |
|
Back to top |
|
|
irs009
Joined: 14 May 2006 Posts: 99
|
Posted: Thu Sep 27, 2007 9:59 am Post subject: |
|
|
Jeremy, I've been looking at your TV, and notice it has a feature called 'Pixel Plus' (which I don't understand). If I am watching digital TV on my Philips HDTV, I can't switch inputs. I use macros to change the set to analog mode then select the input.
Don't know if that will help you, but it's all I've got.
Did you put a 0 in front of the 2 digit codes? I should have done that...Jack |
|
Back to top |
|
|
|