URC-1055 Two different(?) ones.

bizzybody · Post by **bizzybody** » Wed Jun 06, 2007 4:50 pm

I picked up a couple of UEI remotes for 50 cents each. The lables in the battery compartments are;

Remote 1;

URC-1055BC0
C054801

Remote 2;

1055WC0-XXX-0001-001
C055105

They're for 5 devices, with a round section near the front that bulges out on the sides.

Other than the battery compartment lables, they're identical.

Post by **The Robman** » Wed Jun 06, 2007 5:12 pm

Do they have a JP1 connector?
What do they look like? Photos?
Are they labelled for an OEM company?

speaker.guy · Post by **speaker.guy** » Wed Jun 06, 2007 5:56 pm

Rob:
The 1055 is an "Atlas" remote. The one I sent you is a 1055WCD.

Post by **The Robman** » Wed Jun 06, 2007 6:29 pm

Right you are, mine has the sticker:
1055WC0-XXX-0001-001

speaker.guy · Post by **speaker.guy** » Wed Jun 06, 2007 7:07 pm

Looking at the number of recent posts on these remotes, I think a lot of them (particularly the older JP1.2 models) have just been discontinued and surplussed by the cable cos. The remote family does have a lot of possibilities if all the model vartiants can be sorted out and made programmable by JP1.x.
As an aside, I think my daughter in Houston (Time Warner/SA8400) has one of the JPI.3 learning ones. I will be there next weekend and will check it out. I will try to remember to take my cable!

Capn Trips · Post by **Capn Trips** » Wed Jun 06, 2007 11:03 pm

Note the numbering scheme for the Atlas line.

bizzybody · Post by **bizzybody** » Thu Jun 07, 2007 12:31 am

They look like the one labled Atlas DVR (day) 1055, with the rocker button labled DAY.

(That site is using the same full picture as the DVR-1054 for the 1055.)

They're CableONE OEM remotes.

Yes, of course they have the JP1 connectors. Think I woulda bought them if they didn't? ;P I'm hoping they'll be more amenable to programming for a 37" Magnavox HDTV and an RCA HDMI upconverting DVD player than the Millennium 4 I have. (A $3 thrift store find.)

Capn Trips · Post by **Capn Trips** » Thu Jun 07, 2007 6:03 am

I just wish there was an extender for the PVR 5 (day). Then I'd jump on one on eBay in a heartbeat.

speaker.guy · Post by **speaker.guy** » Thu Jun 07, 2007 9:32 am

Picture on the site has two DIFFERENT pictures for the 1054 & 1055. 1055 has a rocker for "day+" & "day-", 1054 has a single button labelled "SETTINGS", no "day" buttons. (This is the menu function on the DVRs).

Capn Trips · Post by **Capn Trips** » Thu Jun 07, 2007 9:48 am

Nah. bizzybody is right. When you roll-over, the CLOSE-UP shows the day rocker button, but if you look at the basic pics (non-rollover closeup), they are identical. Apparently they were too lazy to post a separate pic for the (day) version of the remote.

Now has anybody seen a 1056 in real life yet? I think I would like IT best of all!

speaker.guy · Post by **speaker.guy** » Thu Jun 07, 2007 10:04 am

I was referring to the rollovers. Basic photos are identical (1055 wrong one) as you observe.....

Has ANYONE succcessfully programmed a 1055 using JP1.x? If so please post which rdf you used. I can't make it work nohow!

Post by **The Robman** » Thu Jun 07, 2007 10:23 am

It is still on my "to do" list. I intend to create an upgrade for one of my devices, probably ReplayTV, then load it into the remote and try it out. If I have the same problems as previous posted about buttons being scrambled, I'll investigate further and (hopefully) fix the RDF.

bizzybody · Post by **bizzybody** » Thu Jun 07, 2007 10:53 pm

So it looks like I wait for this remote to be fully debugged before I should try reprogramming it?

Capn Trips · Post by **Capn Trips** » Fri Jun 08, 2007 12:13 am

Perhaps not using JP1, but there is no reason you cannot try to programme it directly from the keypad for macros and keymoves.