|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
Zellarman
Joined: 11 Oct 2006 Posts: 56 Location: Long Island, NY |
Posted: Tue May 15, 2007 11:47 am Post subject: Multiple commands vs. Macros |
|
|
Is it possible to teach a macro from one remote into a simple single key press of another? Specifically 8910 to 8910. Of course I'll experiment on my own and disclose the results, but was curious to see what, if anything, others may have experienced. I have successfully 'taught' a double key press (full on) of a Lutron spacer remote into a single key, but because neither the single press nor double tap is something easily recognized by this newbie (it's not the standard OBC or protocol) I don't know what the resulting signal for the double press is vs. the single press. I will try w/ other commands, and share what I learn. I imagine the remotes being used, the individual commands themselves, and the number of commands are all determining factors (plus possibly others unknown to me) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Tue May 15, 2007 12:03 pm Post subject: |
|
|
The length of signal that can be learned using a JP1 remote is limited. You may be able to learn two buttons together if you press the 2nd button quick enough, but it's unlikely that you'll be able to learn more than two.
Of course, you can always learn the buttons one at a time and then put all of them into a regular macro. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Tue May 15, 2007 12:31 pm Post subject: Re: Multiple commands vs. Macros |
|
|
Zellarman wrote: | Is it possible to teach a macro from one remote into a simple single key press of another? Specifically 8910 to 8910. |
Probably not without using the extender.
Without the extender, the remote generates a moderately long duration for each step in a macro and for the pause between steps. For most IR protocols, just that long duration is enough to prevent another 8910 from learning the whole macro. If it weren't enough, I think the pause would be enough.
Just pressing the keys quickly by hand in the sending remote would be more likely to work.
With the extender (in the remote executing the macro), it could go faster than you could press keys manually. Maybe you could get a few keys to learn as one into another 8910. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|