JP1 Remotes

[skyhook8]

I learned two keys for each HR20. I then pulled the config with IR 6.2. Under the Learned Keys tab I can see the four keys. The protocol shows to be Russound and the OBC, Hex Cmd, & EFC match with those in the HR20 rmdu file uploaded by bobshults2.

The device ID is the only thing different between the two receivers. On the standard it shows to be "12" and on the HR20 controlled by AV1 it shows to be "2".

So now I have no idea how to modify the fixed data value based on this information.

[DavidEC2955]

OK like the Tivo's you could assign multi units different codes?

Am I missing something here.. how does one do that for a HR20's IR code base?

--David