Soyo 32 lcd tv

scutzi128 · Post by **scutzi128** » Fri Mar 23, 2007 12:13 am

1. Device: Soyo 32" DYLTO32A lcd tv
2. Type of device: tv
3. Year: 2006
4. JP1/UEI Remote model: comcast urc1067
5. Do you have a JP1 cable? yes
6. Still have original remote? yes
7. Checked the file section? yes, file did not work
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? n/a

Hi guys this site has already been a huge help to me and opened up the world of jp1 programming to me. I have a comcast urc1067 and I got it to program with one of my audio systems (logitech z680) But it seems that the onther 2 things I want to program it for will not work with the codes in the file section. Any help would be great and if you need anymore info just let me know. Thanks Jake-

Post by **The Robman** » Fri Mar 23, 2007 7:52 am

An upgrade file is available for a 32" Soyo TV (model DYLTO32A), did you try this upgrade? If you have a different model of Soyo TV you should specify what the model number is.

http://www.hifi-remote.com/forums/dload ... le_id=2791

scutzi128 · Post by **scutzi128** » Fri Mar 23, 2007 9:23 am

Yea i used this upgrade file because that is my tv model number but it would not control anything on the tv

johnsfine · Post by **johnsfine** » Fri Mar 23, 2007 9:43 am

scutzi128 wrote:Yea i used this upgrade file because that is my tv model number but it would not control anything on the tv

If the model number matches, most likely the upgrade is correct and you did something wrong in installing or testing that upgrade.

You should save a copy of your .ir file (from ir.exe) as it was when uploaded to the remote for testing. (If you don't have that available, it's worth redoing and retesting). Then put a copy of that .ir file in our diagnosis area and post the file's url back to this thread. Someone will look at it and see if any error is obvious.