All of the non-Jog Dial functions generate a single signal, using the NECx2 protocol for Device 5, Sub-Device 5. The Jog Dial functions (Step, six speeds for Fast Forward and six speeds for Rewind) all send an identical NECx2 signal for Device 5, Sub-Device 5, but then each sends a unique NECx2 signal for Device 2, Sub-Device 2. I tried creating a KeyMove for the Device 2, Sub-Device 2 codes in IR.exe under the DVD 715 device even though that would use Device 5, Sub-Device 5. Unsurprisingly this did not work. I then used RemoteMaster to generate an Upgrade 1715 device containing nothing but the Jog Dial functions and using only the Device 2, Sub-Device codes and creating it as a Device 2, Sub-Device 2 remote. I then loaded this into IR.exe and uploaded it to my remote (a URC-9910) but still no luck.
I would like to use pretty much all 13 of the Jog Dial functions (well, there is actually a 14th, a Reverse Step, but that only works with the VCR and not the DVD so I hardly ever use that one), but I would really like to get those functions out of the Learned Memory.
Thanks for any help on this
Jim Wise
Extra Info:
IR file with learned Jog Dial functions: Samsung DVD-V2500 Jog Dial Problems.IR
RMDI file with Device 2 Sub-Device 2 Jog Dial functions: Samsung DVD-V2500 DVD-VCR Combo Jog Dial Only.rmdu
Code: Select all
Protocol: NECx2
DS=Device/Sub-Device
F: X-Times Fast-Forward
R: X-Times Rewind
D/S OBC HEX EFC Learned to Button
Step 5.5 122 A1 007 Pause
2.2 144 F6 125
2xF 5.5 122 A1 007 1
2.2 132 DE 188
4xF 5.5 122 A1 007 2
2.2 130 BE 191
8xF 5.5 122 A1 007 3
2.2 138 AE 063
16xF 5.5 122 A1 007 4
2.2 142 8E 062
32xF 5.5 122 A1 007 5
2.2 140 CE 060
128xF 5.5 122 A1 007 6
2.2 136 EE 061
2xR 5.5 122 A1 007 7
2.2 133 5E 192
4xR 5.5 122 A1 007 8
2.2 131 3E 195
8xR 5.5 122 A1 007 9
2.2 139 2E 067
16xR 5.5 122 A1 007 0
2.2 143 0E 066
32xR 5.5 122 A1 007 Enter
2.2 141 4E 064
128xR 5.5 122 A1 007 TV/Vid
2.2 137 6E 065 
.