JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Samsung DLP HDTV HL-5678 - need discretes

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
unclemiltie
Expert


Joined: 21 Jan 2004
Posts: 1795
Location: Pittsburgh, PA

                    
PostPosted: Tue Jan 16, 2007 6:26 am    Post subject: Samsung DLP HDTV HL-5678 - need discretes Reply with quote

1. Device: Samsung HL-5678
2. Type of device: DLP HDTV
3. Year: 2005
4. JP1/UEI Remote model: 6131, 6960
5. Do you have a JP1 cable? yes, several
6. Still have original remote? yes
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? no
9. Partially working setup code? don't know
10. Learning remote question? no


A couple of questions for those who might have this or othr Samsung DLP's

1: I am looking for a discrete to select the antenna input. I've downloaded the other Samsung DLP upgrades and can find a discrete for nearly ever other input (HDMI, AV, S-Video, etc) but not one that selects the antenna input. There are probably 100+ unsued OBC codes and I'm slowly going through them to see if I can find it but thought I'd ask.

2: The set is extremely slow at responding to codes to set the input, for example, one of my thoughts on the Antenna was to use a macro to set it to PC input (the last in the toggle list) and then toggle the input to get to antenna but the set won't respond to the toggle until the PC input has completely completed. It also won't respond to any input select after power-on until the picture has come on, quite a while after power. I'm having trouble timing macros in this situation. How have others with Samsung DLP's dealt with this?


thanks
Back to top
View user's profile Send private message
irs009



Joined: 14 May 2006
Posts: 99

                    
PostPosted: Tue Jan 16, 2007 12:33 pm    Post subject: Reply with quote

I have those timing problems on all of my equipment. If the macro is short enough I use Vol+, Vol-, as many times as needed for the delay.

I also use this trick, that I copied from a thread, if I need a longer delay.

The Robman posted:

Try this...

1) Assign setup code VCR/0037 to the VCR button.
2) Keymove copy the RECORD button from VCR mode to TV mode
3) Try using the TV/RECORD button as a delay in your macros

Here's how you do step 2:

1) press and hold SETUP, 2 flashes
2) Type 994, 2 flashes
3) Press VCR, RECORD, TV, RECORD, 2 flashes

You may have to use a little different technique to program your remotes.

Jack
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control