View previous topic :: View next topic |
Author |
Message |
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Mon Dec 15, 2003 2:26 am Post subject: 6012 Extender Troubles |
|
|
I pretty much followed the same formula for the 6012 extender that I did for the 6131 extender, but it does not work:
Basic Stuff I did:
-downloaded ext3 for 6012/8011/8811
-used extinstall to combine a virgin IR save of 6012 with the .hex to create an extended version. I did not use the .rdf's that came with the extender but used the latest .rdfs.
-pressed "power" to activate the extender after every time I uploaded the extender or took out a battery.
Design:
-followed the smithjo design, except minor modification for tv (tv does have discrete on/off but used toadtog with the discrete codes to prevent the tv-display (channel, time etc) from popping up every time CBL or VCR are pressed, the same as I did for the 6131 design that works.
Behavior:
Pressing VCR or CBL sends out some blinks but does nothing
Pressing TV then power often gets me 4 blinks like the extender is being reactivated but does not do anything.
Eventually the remote starts to act like an unextended remote, where TV-power toggles TV, CBL-power toggles cable box, etc.
I uploaded my IR file here, if anyone has time to peek at it.
Possible problems:
-I goofed and have some heinous error in my keymoves or macros (likely)
-Problem creating initial extinstall using the new .rdfs ?
-Problem with extender 3 and 6012 (I know there is a problem with some 8811s)
Many thanks in advance if anyone has time to peek at this.
Cheers,
Steve |
|
Back to top |
|
|
usblipitor
Joined: 10 Oct 2003 Posts: 516 Location: Greenbelt, MD |
Posted: Mon Dec 15, 2003 6:08 am Post subject: |
|
|
I found my problem. I did not install the LKP protocol.
When I installed the extender on the URC6131 remote, the 6131 extender came with the LKP protocol, so I mistakenly thought the 6012ext3 would come with it also, and never checked until now.
I went to the extender folder and found the LKP protocol here and installed it. Now everything works.
Sorry to bother you all! I am an idiot! Happy Holidays, _________________ -Steve
Beginner's Guide
CodeSearchFAQ
JP1Files |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Dec 15, 2003 8:59 am Post subject: |
|
|
Easy mistake to make and an example of the most common reason that a newly configured extender setup repeatedly deactivates:
A device upgrade used a protocol that wasn't there (or the related problem: KeyMove used a setup code that wasn't there).
Maybe the next person to have a similar problem will read this. |
|
Back to top |
|
|
|