JP1 Remotes

BigDLondon

I am in need of help to make a device upgrade from a ccf for a NEC tv to use with my 8910 from Robman.Here's the link to the file.Thanks in Advance.BigD P.S.Thanks for the remote Robman.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3653

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

This type of question is better suited to the Code Search Forum, where you should use the required template. (See the link in my sig below to the #1 Code Search FAQ)

Have you tried built-in codes TV/0030, TV/0056 and TV/0178? (DVD/0672 might also work a few functions)

There are a bunch of NEC TV upgrades in the file section. Have you tried any of THEM?

What kind of TV is it? The more info you provide, the more likely you are to get useful assistance.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

Lacking success with any of the above, it appears that your file uses NEC1 (or NEC2) protocol - either should work, but you should test to see if the Volume and Channel keys repeat properly after building the upgrade, and if they do not, select the other).

So in KM,
Choose a device type (TV is fine)
Choose a setup code (i.e. 0178)
select NEC1 protocol,
Device 4
no subdevice (leave blank)

On the functions page, assign the EFCs displayed in your file to the corresponding functions (you will have to add the "timer" function) and assign the functions to the buttons you want on the buttons worksheet, than back on the first worksheet copy the device upgrade data into IR, assign the setup code (i.e. TV/0178) to the desired device button in IR's General tab and upload to your remote.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!

Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)

Capn Trips · Expert Joined: 03 Oct 2003 Posts: 3990

Such a KM upgrade would give you the following device upgrade to paste into IR:

BigDLondon · Posted: Tue Oct 03, 2006 4:20 pm Post subject:

Thanks for the help Capn Trips.I'll remember to save this one coz' I got all the other upgrades.Yours in JP1 and beyond BigD

johnsfine · Posted: Tue Oct 03, 2006 5:04 pm Post subject:

If you have future occasion to want to decode a CCF file, you should use DecodeCCF.exe and a currect copy of DecodeIR.dll rather than whatever obsolete stuff you used this time (I expect it was CCF2EFC.exe)

http://john.fine.home.comcast.net/ir/decodeCCF.zip
http://john.fine.home.comcast.net/ir/Decode_IR_DLL.zip