View previous topic :: View next topic |
Author |
Message |
kcmurphy88
Joined: 20 May 2004 Posts: 46 Location: Los Angeles |
Posted: Sun Aug 27, 2006 2:52 am Post subject: |
|
|
I tried using the Denon 3803 codes in the archive, but something bad happens to the Function sheet when you save it under KM 9.04. The EFC codes become crazy and the OBC and EFC columns swap.
Since I have an old file cobbled together from older Denons, it's not a big deal for me yet, but it might become that under JP1.2. Especially since the current file is missing the discretes that used to be EFC 246-2 and 248-2. |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Sun Aug 27, 2006 4:08 am Post subject: |
|
|
kcmurphy88 wrote: | I tried using the Denon 3803 codes in the archive, but something bad happens to the Function sheet when you save it under KM 9.04. The EFC codes become crazy and the OBC and EFC columns swap. | That upgrade file has been saved incorrectly with a very old version of KM. When you load it into KM v9.04, go to the Functions tab and click on the OBC button. Answer No to the question "Do you want to convert...?" because the entries are already OBC values. Then re-save the file, and it should be OK. _________________ Mike England |
|
Back to top |
|
|
|