JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Learned power button not working

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
bart2brett



Joined: 09 Aug 2006
Posts: 34

                    
PostPosted: Sun Aug 20, 2006 4:00 pm    Post subject: Learned power button not working Reply with quote

I have the URC9910 and 5 devices to control. I have had to learn 3 of the devices, but two of them don't respond to the learned power button. I've attempted to re-learned the button. But it still doesn't work. Any ideas?
Back to top
View user's profile Send private message
irs009



Joined: 14 May 2006
Posts: 99

                    
PostPosted: Sun Aug 20, 2006 4:40 pm    Post subject: Reply with quote

If you're going to get help from the experts, you'd better give a lot more information. What are the 2 devices? How do they normally turn on? Some receivers for example turn on when you select an input. Are you a JPI user? Have you checked the file section for your devices? They will ask you 20 questions, so give them 30 answers to start with.

Jack
Back to top
View user's profile Send private message
bart2brett



Joined: 09 Aug 2006
Posts: 34

                    
PostPosted: Sun Aug 20, 2006 5:45 pm    Post subject: you're right Reply with quote

the two devices are: Fortec Lifetime ultra sat receiver, and a Channel Master antenna rotor. Both turn on and off with a power button. I am a JP1 user. I have used the files found in the file section, and when they didn't work, I "learned" them (along with a third device which does work).
Back to top
View user's profile Send private message
underquark
Expert


Joined: 20 Jun 2005
Posts: 874
Location: UK

                    
PostPosted: Sun Aug 20, 2006 5:54 pm    Post subject: Reply with quote

That's about six answers. Now for some more questions: since you are a JP1 user, can you tell us what the IR protocols, device numbers etc. are and can you upload to the Diagnosis area of the File Section the IR files containing the learned signals? And then please post another message with links to any uploaded file(s). Any pointers to which cides worked and which didn't might also be useful.
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3990

                    
PostPosted: Mon Aug 21, 2006 11:40 am    Post subject: Reply with quote

Chiming in about the paucity of information - I would refer you to the #1 Code Search FAQ (linked in my sig below).

Barrring any additional info, my first guess would be that the power signals use a protocol with a toggle bit, which a learned signal will only intermittently properly reproduce, whilst a properly generated upgrade WILL correctly reproduce.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control