Help creating rdf for urc-7555 (OFA5 digital) JP1.2

[aldaweb]

http://www.hifi-remote.com/forums/dload ... le_id=3517
Presume rdf must start with :
[General]
Name=One For All URC-7555 One For All 5 Digital
EepromSize=$1000
Processor=HCS08
BaseAddr=$EC00
WAVUpgrade=0
AdvCodeFormat=EFC
AdvCodeBindFormat=LONG
SectionTerminator=$FF
EFCDigits=5
ImageMap=URC-7555.map

need help with rest of rdf
TIA

[jetskier]

Try using the RDF for the 10820 to start.

10820 RDF

It appears to have a similar general section. Either way, it's worth a shot.

You'll still need to create the map and image files for use in RM.

[aldaweb]

Provisional rdf now being tested.

[jetskier]

A couple things....

• 1) I think you'll have to remove the line marked "AdvCodeFormat=EFC" so RM will correctly format the long key moves as Greg just recently updated in RM v1.65
  2) Your protocols section doesn't have all the variants updated as well. I'm not sure it this applies to the 7555, but this is what the guys have come up with for the x820 family.

Code: Select all

[Protocols]
0000, 0002:5, 0006, 0007, 000A, 000C, 000D, 000E, 0011, 0013,
0014, 0015, 0018, 001A, 001B, 001C, 001D, 001E, 001F:8, 0021,
0022, 0027:new, 0029, 002A, 002D, 002F, 0032, 0034, 0039, 003A,
003D, 003F, 0045, 0046, 0056, 0058, 005A, 005B, 005C, 005D,
005E:2, 005F, 0060, 0061, 0065:2, 0067, 0068, 006A, 006E, 0073,
0078, 007E:3, 0083, 0087, 008D, 0092, 0093, 0098, 009C, 009E,
00A4, 00AF, 00B6, 00BE, 00C4, 00C9, 00CA, 00CD:2, 00CE, 00D0,
00D7, 00DB, 00DE, 00E2, 00E3, 00E7, 00E8, 00F0, 00F2, 00F5,
00F8:3, 00FC, 0103, 0109, 010C, 010E, 010F, 0111, 0114, 0115,
0117, 0118, 0119, 011A, 011B, 0125, 012A, 0161, 016D, 0174,
017E, 0182, 0184, 0186, 018B, 0190, 0194, 01A4

[aldaweb]

A couple things....

• 1) I think you'll have to remove the line marked "AdvCodeFormat=EFC" so RM will correctly format the long key moves as Greg just recently updated in RM v1.65
  2) Your protocols section doesn't have all the variants updated as well. I'm not sure it this applies to the 7555, but this is what the guys have come up with for the x820 family.

Code: Select all

[Protocols]
0000, 0002:5, 0006, 0007, 000A, 000C, 000D, 000E, 0011, 0013,
0014, 0015, 0018, 001A, 001B, 001C, 001D, 001E, 001F:8, 0021,
0022, 0027:new, 0029, 002A, 002D, 002F, 0032, 0034, 0039, 003A,
003D, 003F, 0045, 0046, 0056, 0058, 005A, 005B, 005C, 005D,
005E:2, 005F, 0060, 0061, 0065:2, 0067, 0068, 006A, 006E, 0073,
0078, 007E:3, 0083, 0087, 008D, 0092, 0093, 0098, 009C, 009E,
00A4, 00AF, 00B6, 00BE, 00C4, 00C9, 00CA, 00CD:2, 00CE, 00D0,
00D7, 00DB, 00DE, 00E2, 00E3, 00E7, 00E8, 00F0, 00F2, 00F5,
00F8:3, 00FC, 0103, 0109, 010C, 010E, 010F, 0111, 0114, 0115,
0117, 0118, 0119, 011A, 011B, 0125, 012A, 0161, 016D, 0174,
017E, 0182, 0184, 0186, 018B, 0190, 0194, 01A4

Thanks. Have now uploaded Image and map for this remote.
I haven't altered the protocols yet in the rdf as I'm at work and can't check whether any errors are thrown up from that.

[aldaweb]

I think as this is a European model that the protocols are likely to be the same as in a 8206 Kameleon. US models don't seem to have the $015e protocol necessary for UK IRDA cable remote emulation.
I tried an upgrade but though it seemed to upload OK when I downloaded from the remote to check it was not present though the keymoves were still listed. rmdu here
Image map & rdf here
Had to do a 981 reset for the remote to learn properly.

RM 1.65
IR70beta2.

[mr_d_p_gumby]

Here is the correct [Protocols] section for the URC-7555 RDF:

Code: Select all

[Protocols]
0000, 0002:5, 0006, 000D, 0010, 0011, 0013, 0014, 0018, 001C,
001F:8, 0020, 0027:new, 002A, 002C, 0034, 003D, 0045, 004A, 004B:7,
0051, 0057, 0058:2, 005A, 005C, 005D, 005E:2, 005F, 0064, 0065:2,
0066, 0068, 006A, 006C, 0073, 0075, 007E:3, 0082, 0087, 008C,
008E, 0095, 0098, 009C, 009E, 00A0, 00A1, 00A5, 00A6, 00A8,
00AA, 00AB, 00AF, 00B0, 00B2, 00B6, 00BD, 00C4, 00C9, 00CA,
00CD:2, 00D1, 00D5, 00DE, 00E2, 00E5, 00E8, 00EB, 00ED, 00EF,
00F0, 00F3, 00F4, 00F8:3, 0108, 0109, 010C, 0111, 0112, 0114:2,
011A:2, 011B, 011E, 0125, 012A, 012B, 0156, 015E, 0160, 0161,
016A, 016C, 0173, 0176, 017E, 0182:2, 0184, 018C, 019A, 01C4

(This includes variants that are not in protocols.ini yet, but will be soon.)

[aldaweb]

Here is the correct [Protocols] section for the URC-7555 RDF:

Code: Select all

[Protocols]
0000, 0002:5, 0006, 000D, 0010, 0011, 0013, 0014, 0018, 001C,
001F:8, 0020, 0027:new, 002A, 002C, 0034, 003D, 0045, 004A, 004B:7,
0051, 0057, 0058:2, 005A, 005C, 005D, 005E:2, 005F, 0064, 0065:2,
0066, 0068, 006A, 006C, 0073, 0075, 007E:3, 0082, 0087, 008C,
008E, 0095, 0098, 009C, 009E, 00A0, 00A1, 00A5, 00A6, 00A8,
00AA, 00AB, 00AF, 00B0, 00B2, 00B6, 00BD, 00C4, 00C9, 00CA,
00CD:2, 00D1, 00D5, 00DE, 00E2, 00E5, 00E8, 00EB, 00ED, 00EF,
00F0, 00F3, 00F4, 00F8:3, 0108, 0109, 010C, 0111, 0112, 0114:2,
011A:2, 011B, 011E, 0125, 012A, 012B, 0156, 015E, 0160, 0161,
016A, 016C, 0173, 0176, 017E, 0182:2, 0184, 018C, 019A, 01C4

(This includes variants that are not in protocols.ini yet, but will be soon.)

Thanks Mike.
My problem now is to get a device upgrade to stick.
files here
reloading the b4.ir file shifted the learned commands from the Sat to TV button over-riding the 0556 button codes.

[aldaweb]

Modified rdf with working upgrades now uploaded.
still a problem with learned commands all assigned to DVD on download and TV on upload
files here

[aldaweb]

RDF now working thanks to binky123 who also found the reason for the above problem which is in the way IR70beta handles devices with learned commands.
edit: Added setting into rdf which fixes this.

[iibm]

added protocol 16C to the 7555 rdf (missing)

[binky123]

added protocol 16C to the 7555 rdf (missing)

For some reason, the [protocols] section was not updated in the RDF.
The whole protocol section should be replaced with the one listed in this thread.

[iibm]

i'have updated the rdf
with the protocol change you posted.

[iibm]

The VPT Device was not good i replaced it by :
VPT Device=$016.3.4.1.0 DeviceButtons

in the rdf

[mr-b]

Hi

I'm just starting out on this JP stuff with my URC-7555 remote. I don't understand any of the above posts, but can someone say whether it is possible to program my URC-7555?