LCD TV Citizen Lt2710 - Update.

Krisek · Post by **Krisek** » Sun Jul 30, 2006 5:37 pm

1. Device: CITIZEN LT2710 LCD TV
2. Type of device: LCD TV
3. Year: 2000 - 2005
4. JP1 Remote model: Radio Shack URC 6123B *15-2138 Kameleon
5. JP1 user? No but i can make the cable....
6. Still have original remote? YES Working !
7. Checked the file section? YES nothing ther.
8. Checked Pronto file section (at R/C)? YES nothing ther.
9. Partially working setup code? NO
10. Learning remote question? Tried but no sucess.

Post by **The Robman** » Sun Jul 30, 2006 6:53 pm

I've never heard of the Radio Shack URC 6123B remote (and that isn't a typical RS part number either), but suffice to say we don't know if it's a JP1 remote and even if it is, it's not supported yet. So, any code info that we might provide won't be of any use to you.

Krisek · Post by **Krisek** » Sun Jul 30, 2006 7:19 pm

it is for sure JP1 i have gold pins and JP1 info..
this is Kameleon remote
and yeh may mistake i read model numer from the remote board
on the box i have 15-2138

Post by **The Robman** » Sun Jul 30, 2006 7:56 pm

You say that you've tried learning but not had any success, is that just with this one Citizen remote or is that with all your OEM remotes?

Are you sure that you're using the correct learning procedure...
http://www.hifi-remote.com/forums/viewtopic.php?t=3943

If you can figure out how to learn the signals from the Citizen remote, and if you get yourself a JP1 cable, you should be able to use the learned signals to create a new upgrade for this TV.

Krisek · Post by **Krisek** » Sun Jul 30, 2006 8:00 pm

i will try learn with other remotes and i will make a update on this thx for yours time

sorry foor Poor English.

Krisek · Post by **Krisek** » Sun Jul 30, 2006 9:01 pm

ok some news. Learning is working with other remotes like from DVD Philips
i try to learn with Citizen TV LCD remote - i setup save OK - but tv is not responding -

Post by **The Robman** » Sun Jul 30, 2006 9:32 pm

Are you sure that you're not pressing the Citizen button too soon? While this won't matter for some protocols, for others (like NEC1) it will matter.

Make sure that you wait for a second or so after pressing the Kameleon button before you start pressing the Citizen button.

Krisek · Post by **Krisek** » Mon Jul 31, 2006 8:37 am

Hmm i try like this and get this working with power button only :)and TV is responding to that

Post by **The Robman** » Mon Jul 31, 2006 10:16 am

If you have a working learned signal, that should be enough for us to figure out what the protocol is, but you would need a JP1 cable to download the info for us to look at.