View previous topic :: View next topic |
Author |
Message |
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
Posted: Sat Jul 29, 2006 2:03 pm Post subject: |
|
|
The fan has two device codes 31 and 25 both under the Old Panasonic protocol.
The off and on buttons learned signal show the same signal,
Device 31
Sub device - blank
OBC - 63
EFC - 181 or 189 or 165
I am assuming that the "on" button is one EFC and the "off" is another EFC. When I enter 181 in RM it defaults to 31 as the device. When I enter 165 as the EFC RM sets the device to 25 and when I enter 189 for the EFC RM sets the device to blank. None of the buttons in the IR file will operate the fan |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Sat Jul 29, 2006 2:20 pm Post subject: |
|
|
I don't trust a decode of device 31, OBC 63. I think it is a decode error.
Anyway, the choice of three EFC values does NOT represent three different signals. It represents three possible EFC numbers for the same signal, with the difference based on info RM has and the decoder doesn't. So RM correctly shows you that (based on what you put on the setup sheet) 181 is the right EFC for that device and OBC. |
|
Back to top |
|
|
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
Posted: Sat Jul 29, 2006 3:19 pm Post subject: |
|
|
Quote: | I don't trust a decode of device 31, OBC 63. I think it is a decode error.
|
So where does that leave me? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
|
Back to top |
|
|
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
Posted: Sun Jul 30, 2006 10:48 am Post subject: |
|
|
Rob,
Tried the file it and it did not work. Could I be doing somthing wrong in my IR file. I posted it here with your upgrade and two others that I have tried.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3441
I have re learned the buttons with another fan remote (i have 3), and with my 8811 with the same OBC/EFC results. Would this rule out a decode error?
The dispair is setting in. My JP1 remote has conqured a Sony LCD HDTV, Xbox360, Panny Reciever, Phillips DVD, and my Tivo and my goal of one remote will be undone by a stupid fan. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Sun Jul 30, 2006 11:31 am Post subject: |
|
|
I didn't have time to test the upgrade before I posted it, so I could have made a mistake in it. If I get a chance, I will try testing it to see if the output is correct (but if anyone else wants to jump in, be my guest).
Here's what I got from the original learns...
freq = 37.735
1 = +636 -1914
0 = +1908 -642
lead-in = n/a
lead-out = -20410
(repeat complete signal while held)
11001100 00101101 00101101 off
11001100 00111010 00111010 osc
11001100 10100111 10100111 mode
11001100 10011101 10011101 timer
11001100 11000101 11000101 on/speed _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
Posted: Tue Aug 01, 2006 8:03 pm Post subject: |
|
|
Where can I read up on what to do with that information? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21279 Location: Chicago, IL |
Posted: Tue Aug 01, 2006 8:43 pm Post subject: |
|
|
I've updated the upgrade file, so give it another try. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
vdubuclet
Joined: 09 Jan 2006 Posts: 22
|
Posted: Wed Aug 02, 2006 12:06 am Post subject: Feeling the Breeze now |
|
|
It worked. I know have one less reason to have to get up. I thank you. |
|
Back to top |
|
|
|