Sony TA-FB720R

Post by **The Robman** » Sun May 07, 2006 4:01 pm

hunden wrote:I might just have to get a learning remote. I would gladly order one from Rob but living in Sweden I think I wouldn't have it before June.

The delivery time to Europe is usually about 4 days and postage is $9.50 US. Actually, I'm sending some remotes to Sweden tomorrow, so I'll let you know how long it really takes when they arrive.

Post by **The Robman** » Sun May 07, 2006 4:21 pm

Try these upgrades. They use every known Sony device code for audio devices. The volume buttons and POWER buttons are programmed. The input selects are programmed to the numeric buttons.

Upgrade Code 0 = 07 D0 (SAT/2030) dev16 (KM v8.36)
CA 00 D1 08 08 00 64 B8 78 F8 04 84 44 C4 24 A4
48 C8 28 A8
End
Upgrade Code 0 = 07 D1 (SAT/2031) dev48 (KM v8.36)
CA 00 D1 0C 0C C0 64 B8 78 F8 04 84 44 C4 24 A4
48 C8 28 A8
End
Upgrade Code 0 = 07 D2 (SAT/2032) dev121 (KM v8.36)
CA 00 D1 9E 9E C0 64 B8 78 F8 04 84 44 C4 24 A4
48 C8 28 A8
End
Upgrade Code 0 = 07 D3 (SAT/2033) dev19 (KM v8.36)
CA 00 D1 C8 C8 00 64 B8 78 F8 04 84 44 C4 24 A4
48 C8 28 A8
End
Upgrade Code 0 = 07 D4 (SAT/2034) dev25.11 (KM v8.36)
DE 00 D1 98 D0 00 64 B8 78 F8 04 84 44 C4 24 A4
48 C8 28 A8
End
Upgrade Code 0 = 07 D5 (Cable/2035) dev0 (KM v8.36)
CA 00 D1 00 00 00 64 B8 78 F8 04 84 44 C4 24 A4
48 C8 28 A8
End

hunden · Post by **hunden** » Sun May 07, 2006 5:19 pm

Thank you. Will do first thing tomorrow. One thing though, do I have to worry about conflicting setup codes already stored on the remote?

Post by **The Robman** » Sun May 07, 2006 5:22 pm

Do you already have upgrades programmed that use the code numbers that I used? If you do, then yes, you should change the setup code numbers of the upgrades that I posted.

Actually, just to eliminate some steps where user error could creep in, could you post a copy of your IR file please. Then I can load these upgrades in myself and assign them to device buttons.

hunden · Post by **hunden** » Sun May 07, 2006 5:29 pm

You can go ahead and use the ir file I posted in the diagnosis section.
http://www.hifi-remote.com/forums/dload ... le_id=3164 Thank you so much for your kindness. I really hope this will do the trick.

Post by **The Robman** » Sun May 07, 2006 5:40 pm

I have created 2 IR files, one with the first 3 upgrades assigned to the Dream, TV and AUX buttons, and another with the next 3 upgrades assigned. Give them a whirl.

http://www.hifi-remote.com/forums/dload ... le_id=3181
http://www.hifi-remote.com/forums/dload ... le_id=3182

mr_d_p_gumby · Post by **mr_d_p_gumby** » Sun May 07, 2006 7:21 pm

hunden wrote:

Code: Select all

          Function_CD              0x0000000000000520
          Function_Tuner           0x0000000000000420
          Function_Phono           0x0000000000000020
          Function_Tape1/DAT       0x0000000000000620
          Function_Tape2/MD        0x0000000000000120
          Function_AUX             0x00000000000005C0
          Volume+                  0x0000000000000240
          Volume-                  0x0000000000000640

I'm not an expert LIRC decoder, but if these learns can be believed, this is normal Sony 12-bit and the OBCs seem to be the standard ones Sony always uses, however, the data would tend to indicate the Device # is 0, which is not normal.

Post by **The Robman** » Sun May 07, 2006 8:02 pm

mr_d_p_gumby wrote:I'm not an expert LIRC decoder, but if these learns can be believed, this is normal Sony 12-bit and the OBCs seem to be the standard ones Sony always uses, however, the data would tend to indicate the Device # is 0, which is not normal.

That's how I read it too, but the OBCs are normal. So, in addition to creating mini-upgrades that use all of the normal device codes, I also created one that has a device code of zero.

hunden · Post by **hunden** » Mon May 08, 2006 5:32 am

Happy days are here! dev16 (KM v8.36) worked. All I could ever want at this point is a discrete code for the mute function and maybe even power.

johnsfine · Post by **johnsfine** » Mon May 08, 2006 5:44 am

hunden wrote:
Code: Select all
  bits           11

  ptrail       1251

mr_d_p_gumby wrote:I'm not an expert LIRC decoder, but if these learns can be believed, this is normal Sony 12-bit and the OBCs seem to be the standard ones Sony always uses, however, the data would tend to indicate the Device # is 0, which is not normal.

My understanding of LIRC isn't perfect. But Sony12 has 12 bits and no lead-out. The LIRC data says 11 bits with a lead-out that matches the '1' bit.

I read that as device 16, not device 0.

So I'd expect the best place for more info would be the list of commands for Sony12, device 16 at:
http://www.hifi-remote.com/sony/Sony_rcvr.htm

jonib · Post by **jonib** » Tue May 16, 2006 7:07 am

hunden wrote:I would gladly order one from Rob but living in Sweden I think I wouldn't have it before June.

Hi
I'm from(in) Sweden too, Rob sent me some remotes May 8 and I got them today, and I am a happy customer.

Post by **The Robman** » Tue May 16, 2006 7:49 am

jonib wrote:Hi, I'm from(in) Sweden too, Rob sent me some remotes May 8 and I got them today, and I am a happy customer.

And that's actually alot slower than normal. I'm guessing that the customs folks took a peek at Joni's remotes before letting them go through!

hunden · Post by **hunden** » Tue May 16, 2006 3:01 pm

jonib wrote:Hi
I'm from(in) Sweden too, Rob sent me some remotes May 8 and I got them today, and I am a happy customer.

I live in a remote location where mail delivery is always painfully slow. Even with domestic packages I can almost certainly figure it's gonna be a week.