Discrete Aspect Ratio for TV 0053 (JVC AV32F703)

If you already have a working setup code or upgrade, but are looking for discrete codes (for power, inputs, etc), please post here.

Moderator: Moderators

Post Reply
raycmaple
Posts: 13
Joined: Thu Nov 13, 2003 7:49 pm

Discrete Aspect Ratio for TV 0053 (JVC AV32F703)

Post by raycmaple »

Since it isn't listed in the advanced code file, I suspect the answer is no, but has anyone found discrete codes for 16:9 / 3:2 on a JVC AV32F703? The file has discrete codes for on, off and inputs (thank you!), but not for aspect ratio. I could build a toadtog for this, but it is VERY likely to get out of sync, since a power-on always brings the TV up in 3:2 mode, and the family is always using the power button on the set.

After reading about the danger of accidentally putting a TV in service mode, I'm reluctant to go trying "unused" efcs.

Thanks,
Ray
jon_armstrong
Expert
Posts: 1238
Joined: Sun Aug 03, 2003 9:14 pm
Location: R.I.P. 3/25/2005
Contact:

Post by jon_armstrong »

Ray,

In my "database" I have these EFC's but IIRC, they came from a UK set, so use at your own risk. Your TV may start speaking with a British accent :-)

EFC

167 Wide
131 16x9
112 Cinema
-Jon
jetstar52
Posts: 177
Joined: Thu Oct 16, 2003 7:34 pm
Location: Sacramento, CA

Post by jetstar52 »

jon_armstrong wrote:use at your own risk.
This phrase translates to, "try it out on the display model at Best Buy before risking your own gear."
raycmaple
Posts: 13
Joined: Thu Nov 13, 2003 7:49 pm

Post by raycmaple »

Thanks for the suggestions. I know what two of these do.

131 (16:9) acts like a two press toggle on this TV. The first press brings up a menu to tell you which mode you are in (as if you couldn't tell already), and a second press changes it. This would be the basis of a toadtog discrete.

167 (Wide) refers to audio - a "hyper surround" mode

112 ?? The advanced codes file lists this as "Cinema/Game." Sounds like it should be safe to try, but .... I like the "Best buy" approach. :) If only this set was still in stores.

Ray
jon_armstrong
Expert
Posts: 1238
Joined: Sun Aug 03, 2003 9:14 pm
Location: R.I.P. 3/25/2005
Contact:

Post by jon_armstrong »

Ray,

Is it possible when the menu comes up to select with numerals. This is often a hidden feature with menus. So Menu|3|Enter picks the third item on the list rather than using the less reliable Menu|Dn|Dn|Enter.

The second idea is to decode all the JVC HDTV's with DecodeCCF and see if you find some other promising leads.
-Jon
Post Reply