|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
Fast351
Joined: 20 Sep 2003 Posts: 17 Location: Twin Cities, Minnesota |
Posted: Thu Feb 16, 2006 6:29 pm Post subject: Any way to take a JP1 file and turn it into a CCF? |
|
|
OK, I "learned" all the codes from my DViCO Fusion remote, and translated them into a KM spreadsheet file. (see HT Systems file section). I would like to take this file and convert it to a CCF format file so I can use it with another branded IR sensor in my HTPC system. Any good utility to do this?
BTW, is the HT systems the correct place for HTPC remotes?
Thanks!
-Mike |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Thu Feb 16, 2006 9:02 pm Post subject: |
|
|
To make a CCF from that information, you need to use MakeHex.exe and IrPanels.exe
That process creates a CCF with buttons labeled only with OBC numbers. There is no program that copies the function names from the JP1 upgrade to the CCF. If you want the functions properly named in the CCF (as I expect you would), you need to edit the CCF with ProntoEdit while looking at the functions sheet in KM, and find each OBC numbered button in the CCF and rename it.
If you still want to make a CCF, despite that inconvenience, there are instructions for MakeHex with IrPanels in many threads at RemoteCentral.
Also see the readme file packaged with MakeHex at:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5209 |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|