Toshiba SD-H400

89formula · Post by **89formula** » Mon Jan 12, 2004 12:28 pm

Tivo/DVD player combo. I need a KM file if anyone can help. OFA 8910, I dont have the original remote. I really just need the discrete code for the Thumbs Down. I am new at this JP1, but I can use the discrete code in my PDA Omniremote. I can get the OFA to run the DVD part, but no thumb. All other Tivo codes I try wont do it either.

Post by **The Robman** » Mon Jan 12, 2004 1:33 pm

Does the regular VCR/0618 code work the Tivo functions?

89formula · Post by **89formula** » Mon Jan 12, 2004 2:21 pm

No. Codes for Toshiba DVD players get all DVD functions, and I can navigate the Tivo menus, but no "thumbs". I need to reset, which requires 3 thumbs down to confirm the process.

Post by **The Robman** » Mon Jan 12, 2004 3:23 pm

Apparently my buddy "edmund" from the RC forums has been looking in here because he just gave me the Tivo EFCs:

145 Thumbs up
141 Thumbs down
029 Tivo
033 LiveTv
059 Quick
163 Guide

89formula · Post by **89formula** » Tue Jan 13, 2004 8:18 am

Thanks, got what I need. I appreciate the help.

cord · Post by **cord** » Sun May 16, 2004 2:58 pm

Sorry to ask a dumb question, but I'm not very knowledgable about all this. I need the same thing as asked in the original request, but I don't really understand the replies. Could somebody give me a bit of an outline of what I need to do to get my SDH400 to be fully functional with my URC-6131 or RS 15-1994?

Post by **The Robman** » Sun May 16, 2004 3:37 pm

Use the Toshiba DVD setup code, then program the PVR buttons using the advanced codes I posted.

cord · Post by **cord** » Sun May 16, 2004 4:26 pm

Umm....what?

Do you mean I should use ir.exe to tell the 6131 that my PVR button should map to 0503, then use the key moves tab to bind the Thumbs_Up key to 0503's button with EFC 145?

If that's what you mean, I tried that, and it didn't work.

Post by **The Robman** » Sun May 16, 2004 6:05 pm

Do it on the remote rather than through IR.exe and it will work.

cord · Post by **cord** » Sun May 16, 2004 7:11 pm

Oh, I see. As usual, I'm over-complicating things. Thanks, Rob!

jptheripper · Post by **jptheripper** » Tue Jan 10, 2006 2:55 pm

does anyone know of discrete on off codes for this model? or are they included in the toshiba dvd set

Capn Trips · Post by **Capn Trips** » Tue Jan 10, 2006 4:12 pm

Toshiba is notorious for NOT having discrete on and off codes, and a quick scan of the usual places revealed none.

Have you tried the usual work-arounds? Like does "Play" also turn the unit on? If so, "Play-Stop" is a discrete On macro and "Play-Power" is a discrete Off macro. If not "Play" then maybe "Open/Close" will power up the unit?

Else you may have to install and use the ToadTog protocol to simulate discrete functions.

MaskedMan · Post by **MaskedMan** » Tue Jan 10, 2006 5:12 pm

The H400 uses the standard toshiba dvd code 0503. No discretes.

http://www.tivocommunity.com/tivo-vb/sh ... did=185448

jptheripper · Post by **jptheripper** » Tue Jan 10, 2006 7:48 pm

okay thanx for the info.. ill try a couple things

jptheripper · Post by **jptheripper** » Wed Jan 11, 2006 8:04 am

the "live tv" button turns on the sd-h400. So it looks like "live-tv" works as a discrete on, and "live-tv, power" works as a discrete off!!

yeah all my components have discretes now (including my xbox

so off to macro programming