JP1 Help URC 6960

anand · Post by **anand** » Sun Nov 27, 2005 12:40 pm

I have a URC 6960 Kameleon remote and need to program some keys into it. I ordered a JP1 cable but it does not fit. The cable has 6 pins, the remote has 6 solder heads. Can anyone help with what I need.

I tried to hold the pins to the solder heads and used IR to read the remote, but no luck

Please Advise

Anand

Post by **The Robman** » Sun Nov 27, 2005 12:58 pm

With any Kameleon remote, you need to also buy the pogo-pin adapter.

anand · Post by **anand** » Sun Nov 27, 2005 1:10 pm

With any Kameleon remote, you need to also buy the pogo-pin adapter

Don't mean to be cheeky, the following website is where I get my components from, could you please tell me what the part(s) is that I need.

www.rswww.com

Thank you
Anand

Capn Trips · Post by **Capn Trips** » Sun Nov 27, 2005 2:15 pm

HovisDirect is the one vendor who lists in the MARKETPLACE section of this forum who offers a pogo adapter. I don't know that this is a piece any wholesaler would have. You either make one or buy one from Hovis.

P.S. Your link doesn't work, I believe since you have a space before the [

Mark Pierson · Post by **Mark Pierson** » Sun Nov 27, 2005 2:47 pm

Capn Trips wrote:Your link doesn't work

Fixed link.

Post by **The Robman** » Sun Nov 27, 2005 3:10 pm

anand wrote:Don't mean to be cheeky, the following website is where I get my components from, could you please tell me what the part(s) is that I need.

Just like a JP1 cable, the pogo-pin adapter is a JP1 part, it's not something that you can buy from a regular shop. So, you either need to make one yourself or buy one from the same person that you bought your JP1 cable from.