Thomson DPL930VD

[2nisteff88]

Hi,

does anyone have code for this DVD DIVX player ?

Thanks
2ni

[underquark]

Possibly but you don't tell us what type of code it is that you want. It would help if you read the following and used the template included:
http://www.hifi-remote.com/forums/viewtopic.php?t=49

If it's not a remote control code you're after but a region-free code or something else then try here:
http://www.dvd.reviewer.co.uk/

[The Robman]

Please show us all some respect by reading the sticky thread labelled PLEASE READ FIRST.

[2nisteff88]

1. Device: Thomson DPL930VD
2. Type of device: DVD Player
3. Year:
4. JP1 Remote model: URC 9960 B01
5. JP1 user? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? No
10. Learning remote question? I want to learn this device to my 9960 but i don't find ir or rmdu files for it. I discover that an over model use the same remote (Thomson DTH8040 (DVD writer))

[2nisteff88]

I have find a pic of the thomson remote:

[Capn Trips]

In the absence of a cable and pogo adapter, you're options are a bit limited, but not completely.

Since you have a learning remote, follow the instructions in the manual and learn the functions you need. The negative here is you may run out of memory before you have all of the desired functions learned.

Alternatively, you can contact OFA and have them download an upgrade over the phone for you via the Kameleon's built-in modem. The procedure is on page 30 of the manual, and states:

UPGRADE PROCEDURE
1. Call our Consumer Help-Line at:
(330) 405-8620 on any business day,
between 9 AM and 5:30 PM, EST.
2. Our customer service agent will ask for
and record the brand name(s) and model
number(s) of your device(s). Then the agent
will lead you through the upgrade procedure
by asking you to place your telephone’s
speaker next to the CH keys on the OFA
Kameleon 8-Device Remote (as shown below).
NOTE: Only use a land-line phone for the upgrade
procedure. Do not use a mobile phone because it will
not transmit the signals correctly.
In a matter of seconds, new setup codes
for your device(s) will be transmitted
through the telephone and stored in your
OFA Kameleon 8-Device Remote.
3. After your OFA Kameleon 8-Device Remote
has been successfully upgraded by telephone,
stay on the line. Our customer service agent
will ensure that your unit is working properly
with your device(s) and answer any other
questions you may have.

A third alternative requires you to use JP1 tools and modify the existing Thomson DVD upgrade in our file section for your remote, pasting it into an IR file for your remote, and using IRtoWAV to upload it to your remote using it's modem and your computer speakers. This requires you to learn to use KM, IR and IRtoWAV, so there's a steep-ish learning curve.

OR... (recommended) you get a JP1 cable and pogo adapter, learn your signals, build and customize an upgrade and upload it to your remote. In the process, you will learn to customize your remote MUCH more than you can by any of the above methods and using the owner's manual).

[2nisteff88]

Thanks for ur help !

I have find my Remote model, it's RCT311DA1. I find a file named Thomson_DVH211_(Remote_RCT311DA1_in_DVD_Mode) a.txt which will probably help me.