View previous topic :: View next topic |
Author |
Message |
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
Posted: Mon Jul 18, 2005 2:19 pm Post subject: |
|
|
I don't know if this will help any.
I find that RM is significantly easier to use when it comes to combo protocols.
This is where RM shines. Of course, I am biased.
In KM, the byte2 field can be used for many different things, and sometimes must have 2 values. The syntax can be confusing. Sometimes it takes an actual value, sometimes it takes an index (which itself is sometimes 0-based and sometimes 1-based). _________________ -- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST) |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Mon Jul 18, 2005 5:23 pm Post subject: |
|
|
>> resentment <<
sorry if it came across that way. I've tried to make it clear that your (everyone's) help has been invaluable and that I had done the prerequisite reading even if I failed to comprehend it and it appeared otherwise. |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Mon Jul 18, 2005 6:16 pm Post subject: |
|
|
bevhoward wrote: | >> resentment <<
sorry if it came across that way. | I didn't take it as resentment, but rather frustration. We've all (well, except for Rob and John ) been there at some point in our JP1 careers!
Hang in there... it'll be worth it in the end. _________________ Mark |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Tue Jul 19, 2005 1:20 pm Post subject: Success... finally |
|
|
Thanks to all who helped, esp Robman's detail post as on the fifth or so reading of this clarification of the sony20 protocol the proper entries were achieved.
Final update file has been uploaded to the audio devices updates as
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=1940 |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Tue Jul 19, 2005 4:49 pm Post subject: |
|
|
Well done Bev. By the way, I moved the file to the "HT Systems" folder as that's where we keep the upgrades for mini-systems.
I took a peek at the user manual and it appears that there are three buttons missing from your upgrade. Did you capture these buttons and if so, do you know what the codes are:
CLOCK/TIMER SELECT
CLOCK/TIMER SET
ENTER
Also, now that you've got a working upgrade, are you ready to do some experimenting? For starters, I'd like to know if this device supports the MUTE function (even though there isn't a MUTE button on the original remote). To test that, try using the RCVR/0158 setup code and try the MUTE button. I'd like to know if the CD player responds to the regular CD controls. To test that, try using the CD/0000 setup code. You could also try the TAPE/0170 (aka VCR/0170) setup code (which is only present on your URC-6800) to see if it does anything extra for your tape player. You could also test the DVD/0533 setup code to see what extra functions are there.
Here's a quick cross reference of setup codes to device codes:
CD/0000 = 17 and 12
TAPE/0170 = 14 (URC-6800)
RCVR/0158 = 16 and 13
DVD/0533 = Sony20 26.73
If you find that your device does indeed support some extra functions, I'll help you set up some special upgrades that we can use for some more extensive tests. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Tue Jul 19, 2005 6:59 pm Post subject: |
|
|
Code: |
prot obc dev sub
CLOCK/TIMER SELECT Sony12 98 16
CLOCK/TIMER SE Sony12 101 16
ENTER Sony20 124 26 57
|
...ok, next question... how to post in fixed font? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Tue Jul 19, 2005 7:04 pm Post subject: |
|
|
bevhowardok wrote: | ok, next question... how to post in fixed font? |
Like this...
Code: | Function prot obc dev sub
CLOCK/TIMER SELECT Sony12 98 16
CLOCK/TIMER SET Sony12 101 16
ENTER Sony20 124 26 57 |
_________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Tue Jul 19, 2005 7:12 pm Post subject: |
|
|
will attack the experiments tomorrow... rebecca's birthday today and I have already been too focused here ;-)
I did run the 0158 codes and got no response from this unit on any buttons. but will follow your posted steps and try again. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Tue Jul 19, 2005 9:30 pm Post subject: |
|
|
bevhoward wrote: | I did run the 0158 codes and got no response from this unit on any buttons. but will follow your posted steps and try again. |
Use the URC-6800 for the 0158 test (and make sure that you don't have VPT set to another device). Your upgrade file shows that the volume buttons use OBCs 18 and 19 from device code 16, which is an exact match to the volume buttons in RCVR/0158. This makes me wonder whether the MUTE button, which is OBC 20 from device code 16, will also work. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Wed Jul 20, 2005 3:02 pm Post subject: |
|
|
>> VPT set <<
VPT?
>> Mute on the HCD-CPX1<<
Unfortunately (mute is needed) didn't work, tried both the 0158 on the 6800 and your update on the 8910... the other controls such as vol work on both, but not mute.
>> key layout <<
for the most part, your 8910 works fine with two exceptions which I discovered from testing and using the remote.
1 - The device select buttons (tuneband/cd/tape) and the "function" button need to be grouped together... on the 8910, would probably opt for 3,6,9,tv/vid. ("function" is the only way to select "AUX")
pip,move,swap,tv/vid might make more sense and would be the way if the numberpad were needed.
2 - Transports... would keep them the same as was on the 7800/6800 ...reason, since the transport controls don't get shared by the devices, it's beneficial to keep them separated.
When I tried them grouped, it got confusing... i.e. thinking <stop> would stop the CD.
Would also keep the fwd/tapestop/rev on the left/sel/right arrows as the layout is close to rew/stop/fwd on the bottom pad.
Equalizer is (at least in my case) not going to be a regular need via the remote, so it's the orphan that takes what's left.
>> Protocol Continued <<
I have some additional protocol questions related to a different device, so, since this thread has been beat to death, will start a new one in "general"
Thanks, |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Wed Jul 20, 2005 3:08 pm Post subject: |
|
|
It would be helpful if you used the Notes column, or chose more specific function names, to show which virtual device each function applies to.
Some functions are named specifically (eg, "CD Stop") but when I assumed that the generic functions (eg, rewind and fast forward) applied to all modes.
bevhoward wrote: | Equalizer is (at least in my case) not going to be a regular need via the remote, so it's the orphan that takes what's left. |
Here's another way to look at that. If you program a seldom used function to a totally non-obvious button, there's no way that you're going to remember which button you used when you do eventually want to use it. With frequently used buttons, on the other hand, you can be more imaginative because you're unlikely to forget where a button is programmed if you use it everyday.
VPT = "Volume Punch Through"
If you had the VPT set to the TV (for example), testing the volume buttons in RCVR mode would be pointless.
Did you try the numeric buttons with either the DVD/0522 or CD/0000 setup codes? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Wed Jul 20, 2005 4:49 pm Post subject: |
|
|
Quote: | It would be helpful if you used the Notes column, or chose more specific function names, to show which virtual device each function applies to. |
Had planned to go back and update this... remember from the beginner perspective, you are scrambling to simply relate buttons to codes in both directions.
Quote: | Some functions are named specifically (eg, "CD Stop") but when I assumed that the generic functions (eg, rewind and fast forward) applied to all modes. |
A note on how I began was I noted that even though the buttons didn't have numbers on them, each remote I worked with did use a similar "number pad" approach to button layout, so I proceeded to label the text on that "map" approach to store the "learned codes" i.e. "1" on the learning remote matched the "1" location on the other remote even though it had a different label which may help explain how I recognized "CDStop" as opposed to "TapeStop"
The fact that the "functions" disassociated themselves from their assigned buttons was a factor in not renaming them as I moved slowly forward.
I only now understand what you were asking for after completing the 0158 process.
CD/0000 = 17 and 12
Play/Stop/Pause Work
TAPE/0170 = 14 (URC-6800)
Stop Works
RCVR/0158 = 16 and 13
DVD/0533 = Sony20 26.73
no transport controls work
That came home when working with pads that had been on the Cinema6 for years... _however_ the "Templates Booklet" (posted elsewhere) that now sits on the coffee table finally addresses that, not only for me, but Rebecca has been using them as well... the fact that she is currently using the remote at a high percentage of it's potential stuns me since, in the past, she has used the Cinema7 only reluctantly since it was purchased the better part of a decade ago. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21211 Location: Chicago, IL |
Posted: Wed Jul 20, 2005 4:58 pm Post subject: |
|
|
Did you try the numeric buttons with CD/0000 or DVD/0522? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|