Help with Panasonic2 protocol and AE700 projector

e34m5 · Post by **e34m5** » Fri Jun 10, 2005 5:10 pm

Been away so long I can't remember how to do things.

Tried to build an upgrade for this projector. I think my problem is in the protocol. I started with the AE100 upgrade Rob had made and tried using it with some new KeyMoves I added.

However the decode from the remote into IR says that the protocol is Panasonic2. I am not sure how to get to Panasonic2 in KM when building a new upgrade.

I feel so inadequate

Mark Pierson · Post by **Mark Pierson** » Fri Jun 10, 2005 5:17 pm

I think what you want is "Panasonic2 (LCD)" (pid: 0109), which was added in KM v8.31.

e34m5 · Post by **e34m5** » Fri Jun 10, 2005 5:40 pm

Ahh, I am way behind on KM as well. I'll try that.

e34m5 · Post by **e34m5** » Fri Jun 10, 2005 6:28 pm

I must be doing something wrong. Here is the file I created

http://www.hifi-remote.com/forums/dload ... le_id=1831

Mark Pierson · Post by **Mark Pierson** » Fri Jun 10, 2005 7:01 pm

Try changing the protocol to "Panasonic2 (LCD)" (and remove the device settings that are left over in the OEM Code1 field).

e34m5 · Post by **e34m5** » Fri Jun 10, 2005 7:57 pm

That is the panasonic2 protocol

Mark Pierson · Post by **Mark Pierson** » Fri Jun 10, 2005 7:59 pm

When I opened the file you linked to it came up as Manual Settings...

Post by **ElizabethD** » Fri Jun 10, 2005 9:02 pm

May I chip in? Try this. It's for a fancy commercial thing, but a quick peek tells me there are similarities though is short on functions.
http://www.hifi-remote.com/forums/dload ... le_id=1480

Edited: There are 2 kinds of Panasonic2. AE100 manual protocol resembles Panasonic2(hacked). My upgrade is Panasonic2(official). One of them should work.

e34m5 · Post by **e34m5** » Sat Jun 11, 2005 11:43 am

Elizabeth....KM says that your file is not a valid KM file.

e34m5 · Post by **e34m5** » Sat Jun 11, 2005 12:29 pm

Got it working. I had made a dumb move both in KM and IR. At any rate I have uploaded the upgrade.

It only has a few functions as I haven't had time to map them all at this time.

Post by **ElizabethD** » Sat Jun 11, 2005 7:32 pm

e34m5 wrote:Elizabeth....KM says that your file is not a valid KM file.

I just downloaded my file directly from the file section. KM is not objecting in any way.

However,something about this link is bad, yet it looks identical to what it should be. When I clicked on the link, the screen said:

Warning: module(./pafiledb/modules/pa_.php): failed to open stream: No such file or directory in /home/users/web/b729/ipw.hifi-rem/public_html/forums/pafiledb/includes/functions_pafiledb.php on line 45

This is one looooooong strange link