View previous topic :: View next topic |
Author |
Message |
Jay Mc
Joined: 13 Nov 2003 Posts: 3
|
Posted: Thu Nov 13, 2003 2:49 pm Post subject: OT: Palm IR reader |
|
|
Does anybody know of a Palm OS based IR reader? I have a Sony Clie that I'd like to use to grab and copy various codes to use it as a remote. The codes I need to grab are from a non retail remote that uses IR to program industrial equipment in potentially explosive environments. The remote sells from the manufacturer for $600. Any help appreciated. |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Thu Nov 13, 2003 3:13 pm Post subject: |
|
|
Are you planning to use the result in potentially explosive environments? Or do you just need to use that set of IR codes in some other environment.
A typical remote or PDA will usually generate internal sparks if you drop it while it is running, sometimes even if it isn't running. The most common cause is contact bounce on the batteries, but there are other causes. It's not a good idea to use something that can create a spark in an environment where a spark can create an explosion.
Maybe you mean a remote is used through a glass wall to program equipment in an environment where the remote and/or its operator shouldn't go. In that case you need a strong IR emitter. I though I read in some related forum that a Sony Clie doesn't have a strong IR emitter. |
|
Back to top |
|
|
Jay Mc
Joined: 13 Nov 2003 Posts: 3
|
Posted: Fri Nov 14, 2003 6:22 pm Post subject: |
|
|
The equipment is for use in potentially explosive environments, the PDA would only be used with a hot work permit at this facility. It's life saftey equipment and I have all the necessary training and know the required protocols. Distance is not an issue...
Nobody wanna tackle this one? |
|
Back to top |
|
|
jamesgammel Exile Island Resident
Joined: 03 Aug 2003 Posts: 394 Location: Gillette, Wyoming |
Posted: Fri Nov 14, 2003 7:11 pm Post subject: |
|
|
you might also seal it in a zip-loc bag for extra insurance.
Jim |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Fri Nov 14, 2003 7:30 pm Post subject: |
|
|
I don't know the specifics, but I've heard that Sony has IR software for their PDA's (many come with it out of the box). You might want to check Sony support and/or one of the many Sony Clie forums. There's also OmniRemote, which supports the Clie. _________________ Mark |
|
Back to top |
|
|
Jay Mc
Joined: 13 Nov 2003 Posts: 3
|
Posted: Fri Nov 14, 2003 10:20 pm Post subject: |
|
|
no go on the sony but that omni-remote might be an option, Thanks! |
|
Back to top |
|
|
|