JP1 Remotes

Deano242 · Joined: 26 Apr 2005 Posts: 1 Location: Bloomington, IN

First of all, I have a 15-2116 remote and am using IR.exe 6.00 with a USB cable bought from filebug. Read all the newbie doc's and the rest before I even bought anything.

I have reset the remote and can download data fine, but when I try to upload I always get the error "data read back differs from data written". I've tried doing another reset and then uploading a blank data from IR.exe and get the same error. Even tried to use and older IR.exe and get the same error. Anyone have any thoughts for this?

Thanks for your time. Great site and lots of discussions.
_________________
Still Learning

prelude · JP1 Vendor Joined: 26 Jun 2004 Posts: 119 Location: Canada

Hi, have you solved the problem?
_________________
Get the coolest diy gadgets from http://www.diygadget.com today!

Filebug · Posted: Sat May 21, 2005 12:51 pm Post subject:

I have isolated this problem to the Delcom USB chip. They must have made a change to the code they programmed into this chip because the older chips do not cause any errors. I will be contacting them Monday to discuss this issue. In the meantime, please send me an email at jp1@filebug.com for return and replacement information.
_________________
-Tom