Sony HD100

Pat · Post by **Pat** » Mon Nov 03, 2003 3:55 pm

I am looking for the HD100 individual output select format codes.

OBC 50 / EFC 048 work as a toggle to change the output select format but I am looking for the specific code for each of the following output formats:

Video 1/2, VHF/UHF 480i

Video 3 480i

Video 3 variable

Video 3 1080i

VGA 1080i

Can someone help?

Post by **The Robman** » Mon Nov 03, 2003 4:02 pm

As with all questions like this, it pays to give as much basic info as possible, because in all likelyhood, the person who helps you will get the info from a search rather than because they own the same device.

So...
Q1. What sort of device is an "HD100" (ie, is it a VCR, DVD, CD, etc)
Q2. What setup code are you using with it? If it's a homemade code, what protocol and device code(s) are you using?

usblipitor · Post by **usblipitor** » Mon Nov 03, 2003 4:05 pm

The next question will be "What is a Sony HD100?" and it will be asked by Rob

I found this link to a page that states "the Sony HD100 is the most anticipated product in the short history of consumer HDTV." "The Sony HD100 is both a (DirectTV Sat) DSS receiver and a terrestrial TV tuner."

Next I will go look in files section at JP1 to see if anyone has created an upgrade for this device. I wonder if I should look under TV or Sat ?

usblipitor · Post by **usblipitor** » Mon Nov 03, 2003 4:09 pm

I look pretty stupid right about now

But really, Rob's note was not present when I started writing my last note. If I didnt edit it so damn much, I coulda gotten it in 3 or 4 minutes sooner and the thread would flow so much better

usblipitor · Post by **usblipitor** » Mon Nov 03, 2003 4:21 pm

I did not find any KM.txt files in the JP1 file area under TV, Sat, or HDTV, but I did find 3 files .ccf in the proto section of remotecentral. I would love to share this information with everyone, but I haven't a clue how to open .ccf files (notepad didnt work.)

I recall one of the experts here at this forum said that ccf2ecf.exe was not the best choice and he suggested something else. I am going to hunt for that note now.

jon_armstrong · Post by **jon_armstrong** » Mon Nov 03, 2003 5:26 pm

I think the only IR discrete commands are On and Off (EFC's 113 and 109 respectively). A complete command list is here, http://www.anycities.com/rhm5757/sony_home.htm along with information on how to use with an OFA remote. Sat_0639 should have most of the common commands and you can also look here for additional EFC's http://www.hifi-remote.com/cgi-bin2/ueic.cgi?sat_0639

usblipitor · Post by **usblipitor** » Mon Nov 03, 2003 5:31 pm

decodeccf.exe - where can i download this file from? (i could not find it at jp1 files area)

jon_armstrong · Post by **jon_armstrong** » Mon Nov 03, 2003 5:59 pm

Steve,

I think you were trying to respond to this thread, but I answered it in any event:

http://www.hifi-remote.com/forums/viewtopic.php?t=393