Codes for Epson EMP-7250

Hahnter · Post by **Hahnter** » Wed Oct 13, 2004 9:05 am

1. Device: Epson EMP-7250
2. Type of device: Projector
3. Remote model: UCR-7552
4. JP1 user? yes
5. Still have original remote? no
6. Checked Yahoo file section? yes
7. Checked Pronto file section (at R/C)? yes

I'm looking for ir codes for my projector. Unfortunately ís the original remote defect.

Thanks,
Sebastian

johnsfine · Post by **johnsfine** » Wed Oct 13, 2004 9:24 am

You should try the codes for the EMP710 from RC. Even though the model number isn't the same there is a decent chance that the IR codes are the same.

You can create a device upgrade for RC6 protocol, device 42 with a few OBC codes for a simple test.

A few OBCs from that file are

82 Menu
16 Vol+
12 Power

If any of those work you can use DecodeCCF on the original file to get the rest of the OBC numbers.

Post by **The Robman** » Wed Oct 13, 2004 9:35 am

Here's a link to the EMP710 ccf file

jon_armstrong · Post by **jon_armstrong** » Wed Oct 13, 2004 11:45 am

I found a Powerlite 7250 in the Aurora IR library and created a device upgrade
It looks like the same picture and I think the units are marketed as Powerlite-XXXX in North America and EMP-XXXX elsewhere.

The IR protocol is a quad with 46 data bits including a checkbyte that I didn't try to decode since I was using PB. The cursor keys will require a different protocol/device upgrade, but try it and if it works for most of the the commands in the upgrade. If it works, I'll do the rest.

Hahnter · Post by **Hahnter** » Thu Oct 14, 2004 1:55 pm

Thank you very much. The Powerlite 7250 really seams to be the EMP 7250. I thinks it´s the European model. But unfortunately I am not able to test it at the moment. Look at
http://www.hifi-remote.com/forums/viewtopic.php?t=3148

Greetings,
Sebastian