Need help decoding Grundig Tele Pilot 81 D

Post by **The Robman** » Mon Sep 20, 2004 3:46 pm

Here's the KM file: DVD-0775.txt

This file has the complete list of advanced codes for this device.

Mark Pierson · Post by **Mark Pierson** » Mon Sep 20, 2004 5:36 pm

johnsfine wrote:I'm pretty sure Rob's upgrade had the right device number. Remember the translation from device number to fixed data for this protocol is VERY messy and no one has yet written anything to let KM or RM do that translation (I plan to write the messy protocols.ini entry for this pretty soon).

That 'splains it, Lucy!

I've removed the bad code from my previous post...

goodmaker · Post by **goodmaker** » Wed Sep 22, 2004 2:47 pm

I feel my absence, the upgrade DVD/0775 (protocol 0112) works fine, all the learned keys are erased, in fact, the learned keys do not work well.
Thanks everybody, in special: johnsfine and The Robman. The problem is resolute.

Post by **The Robman** » Wed Sep 22, 2004 5:24 pm

goodmaker wrote:I feel my absence...

Tis OK, you made good!

goodmaker · Post by **goodmaker** » Sun Sep 26, 2004 11:24 am

Hi, we finalized that everything was well, but the JP1 file code "DVD-0775.txt" when it's load with KM, in protocol code appears:
Upgrade Protocol 0 = 01 12 (S3C8+) Custom Protocol for DVD/0775 DVD/0775 (KM v8.28)
47 95 11 8B 13 00 01 97 05 C8 02 A1 01 29 02 4E
00 DB 02 2A 03 7A 04 6A 76 00 01 6B 03 B6 03 40
1C 12 F6 01 4C 1E F6 01 64 38 03 5C 01 F6 7D 57
48 C3 38 04 5C 04 F6 7D 57 38 C4 5C 03 F6 7D 57
C6 F8 70 26 F6 01 58 F6 01 0A 7B D4 AF 90 C3 7B
16 90 C3 7B 0C 1C 22 F6 01 6D 1C 1A F6 01 64 8B
1C 1C 1E 6C 1E 8B 0E 90 C3 7B 06 1C 1C 6C 20 8B
04 1C 20 6C 1C F6 7D 8A 18 C6 F6 7D 8A 5A CE AF
F6 01 6D 1C 18 8D 01 64
End

But don´t work. The correct protocol code (like post johnsfine) is:

Upgrade Protocol 0 = 01 12 (S3C8+) Custom Protocol for DVD/0775 DVD/0775 (KM v8.25)
47 95 11 8B 13 00 01 97 05 C8 02 A1 01 29 02 4E
00 DB 02 2A 03 7A 04 6A 76 00 01 6B 03 B6 03 40
1C 12 F6 01 4C 1E F6 01 64 38 03 5C 01 F6 FF 4D
48 C3 38 04 5C 04 F6 FF 4D 38 C4 5C 03 F6 FF 4D
C6 F8 70 26 F6 01 58 F6 01 0A 7B D4 AF 90 C3 7B
16 90 C3 7B 0C 1C 22 F6 01 6D 1C 1A F6 01 64 8B
1C 1C 1E 6C 1E 8B 0E 90 C3 7B 06 1C 1C 6C 20 8B
04 1C 20 6C 1C F6 FF 80 18 C6 F6 FF 80 5A CE AF
F6 01 6D 1C 18 8D 01 64
End.

With these work's fine but I don't know how change in KM.

Post by **The Robman** » Sun Sep 26, 2004 2:05 pm

Don't worry about KM, Mark has already fixed it.