JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Do U C anything obviously wrong with my homebuilt jp1 cable

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Hardware
View previous topic :: View next topic  
Author Message
squawker



Joined: 06 Sep 2004
Posts: 1

                    
PostPosted: Mon Sep 06, 2004 4:03 pm    Post subject: Do U C anything obviously wrong with my homebuilt jp1 cable Reply with quote

http://squawk.info

I can't get my cable to work with my remote. "No response from interface."

Please take a look and tell me if you immediately spot something wrong with this cable...

I used the instructions here: http://www.hifi-remote.com/jp1/simple/

For your consideration, I also have an 8800 Producer 8 remote if that lends anything to a diagnosis.

Thanks for your help!

8)
Back to top
View user's profile Send private message
Mark Pierson
Expert


Joined: 03 Aug 2003
Posts: 3017
Location: Connecticut, USA

                    
PostPosted: Mon Sep 06, 2004 4:19 pm    Post subject: Reply with quote

Have you tried both with and without batteries in the remote?
_________________
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Mon Sep 06, 2004 6:23 pm    Post subject: Reply with quote

Right off the bat I notice that you're using 10k resistors, where the current spec calls for 1k resistors.

The most up to date spec is here...
http://www.hifi-remote.com/files/interfaces/SimpleRev5.doc
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
jherrick
JP1 Vendor


Joined: 31 Dec 2003
Posts: 225
Location: South Berwick, ME

                    
PostPosted: Thu Sep 09, 2004 6:34 am    Post subject: Reply with quote

Hi. Right off the bat Smile *I* noticed you should consider cutting the resistor leads a little shorter or using some heat shrink tubing the next time. If component leads touch each other or touch a metal casing, they will short.
Jim
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Hardware All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control