Sanyo Amp code for the URC6131??

mrsats · Post by **mrsats** » Mon Jun 14, 2004 4:34 pm

I have just spent 3 hours trying to do a codes search for a URC6131 remote.

The code I am looking for is for a
Sanyo Dolby Pro-logic Amp model #DH-405

this was a Canadian 1997 model, and I am finding
very littly Sanyo Codes. I emailed oneforall about 3 weeks
ago and did not get a response

any help or suggestions would be apprciated.

regards,

Post by **The Robman** » Mon Jun 14, 2004 5:41 pm

Do you still have the original remote? I know you don't have a learning remote, but if you still have the original remote maybe someone with a JP1 learning remote can capture the signals for you.

mrsats · Post by **mrsats** » Mon Jun 14, 2004 8:25 pm

I wish I had it, but it has long disappeared...

Post by **The Robman** » Tue Jun 15, 2004 11:41 am

I have dug up some codes which are possibles for this and have loaded them into a URC-6131 file for you in the Diagnosis Area. To test this file, save your current file as a backup then load it into your remote. It contains 7 upgrades which I have assigned to each of the 6 device buttons with the 7th upgrade assigned to the PVR_MENU button.

If you find that one of these upgrades works, let me know which one it is and I'll see if I can get a list of advanced codes for you to try.

mrsats · Post by **mrsats** » Tue Jun 15, 2004 12:08 pm

thanks rob
I will do,
what did you use as a basis for the Sanyo amp codes, I looked everywhere and found little on sanyo for anything but TV's.

Post by **The Robman** » Tue Jun 15, 2004 12:44 pm

I asked the guys at UEI.

mrsats · Post by **mrsats** » Tue Jun 15, 2004 12:46 pm

cool, thanks... will try as soon as I get home...

mrsats · Post by **mrsats** » Tue Jun 15, 2004 2:48 pm

I tried all of them, no go... thanks, but not one code would work, strange thing is with the sanyo, all you really need is to turn on/off and have volume, thats all that is really used via the remote, and from the old remote, it was a small 3 button job, on/off, volume +/-

frustrating as all hell...