I have a Pioneer XV-DV303 all in one home theatre system, a DGTEC HD-STB/DH 2000A set-top box HDTV receiver and an OFA, URC-7541 remote. Can anyone direct me to or provide the device codes (RDF)suitable for my OFA remote for the two devices mentioned.
Preferably these device code files should load into Key Master so that I can load them through IR.EXE.
Many Thanks
Kazam
Pioneer DV-303
Moderator: Moderators
Have you tried the built-in codes for any of those devices first?
I'd be very surprised if the Pioneer DVD portion didn't work right out of the box. Even my 1994 has codes for my DV-333.
As its an all-in-one box, you might need to build your own upgrade from multiple devices as the all-in-ones frequently combine setup codes from their respective components (i.e. like the TV/VCR combos usually need a combined device from both a TV setup code and a VCR setup code).
I'd be very surprised if the Pioneer DVD portion didn't work right out of the box. Even my 1994 has codes for my DV-333.
As its an all-in-one box, you might need to build your own upgrade from multiple devices as the all-in-ones frequently combine setup codes from their respective components (i.e. like the TV/VCR combos usually need a combined device from both a TV setup code and a VCR setup code).
TiVo FREAK!
Brutalizing my 15-1994 since 2000, thanks to JP1
Now abusing a 6131m, 2116, and 2104 too!
Brutalizing my 15-1994 since 2000, thanks to JP1
Now abusing a 6131m, 2116, and 2104 too!
More info please
Ok. let's assume that the old Pioneer codes work. Such a combined unit would most likely need a DVD and AUD code. I've only tried to build a device code file once, with limited success and some time ago. Can you tell me how I would combine the two types of code?
Thanks for the help so far.
Kazam
Thanks for the help so far.
Kazam
As far as I'm aware, none of the JP1 remotes support macros on device keys unless an "Extender" is used.
I'm not familiar with the 7541, but I know there's an extender for the 7560, which might work for you.
To get a specific answer to "Is there an extender for my remote?", you might need to post in the "Extenders" section, since only the extender gurus will know if a package for another remote is compatible, or they can likely create one for you if none exists yet.
Macros will be a totally seperate issue from your device upgrade, however. So you can still pursue getting your device upgrade to work while you wait on finding out about the extender.
My recommendation is to get the latest Keymap master and read EVERYTHING again, especially the sections on device combiners, as this is what you'll likely need to use for your combo device. I've never worked with the RemoteMaster tool, I've always used KM, but I know at one point the device combiner didn't work so well on RM, so unless you do NOT have access to Excell, I'd try to use KM first.
I'm not familiar with the 7541, but I know there's an extender for the 7560, which might work for you.
To get a specific answer to "Is there an extender for my remote?", you might need to post in the "Extenders" section, since only the extender gurus will know if a package for another remote is compatible, or they can likely create one for you if none exists yet.
Macros will be a totally seperate issue from your device upgrade, however. So you can still pursue getting your device upgrade to work while you wait on finding out about the extender.
My recommendation is to get the latest Keymap master and read EVERYTHING again, especially the sections on device combiners, as this is what you'll likely need to use for your combo device. I've never worked with the RemoteMaster tool, I've always used KM, but I know at one point the device combiner didn't work so well on RM, so unless you do NOT have access to Excell, I'd try to use KM first.
TiVo FREAK!
Brutalizing my 15-1994 since 2000, thanks to JP1
Now abusing a 6131m, 2116, and 2104 too!
Brutalizing my 15-1994 since 2000, thanks to JP1
Now abusing a 6131m, 2116, and 2104 too!