JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Returning user. Confused.

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
urc6131



Joined: 02 Aug 2007
Posts: 24

                    
PostPosted: Sun Mar 17, 2024 10:19 pm    Post subject: Returning user. Confused. Reply with quote

I have been using JP1 for 20+ years and I use IR to manage my remote but I have not been using it lately. I used to have a One-For-All URC6131 but the remote is failing (it would suddenly stop responding and requires a power reset) and I need to find a replacement.

I have previous purchased a RadioShack 15-134 JP1 remote. I have not use it with IR.exe until now. After so many years, I am a little confused about how to use it. First I need to address an issue with the connector because the slot in 15-134 is a little smaller (I use the parallel port JP1 cable), I filed it bigger so JP1 will fit. I believe the red wire of the cable should match the pin 1 of the connector.

I then realized I need something called RDF file. The help page here confuses me: http://www.hifi-remote.com/wiki/index.php?title=RDFs

"Get your RDFs here:

JP1 File Section -> Tools -> Main "

There is no RDF to download under "Main". So I went to the "Extenders" section and found a few files under 15-133 (15-13x) which has several 15-134 RDF.

I select the RDF and made a test download. Download from remote failed. Which looks like a timeout. I tried with and without battery. Selecting "JP1.x" and also "JP1 EEPROM". All failed. I don't know what I am missing. Any clues?
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21627
Location: Chicago, IL

                    
PostPosted: Wed Oct 02, 2024 1:20 pm    Post subject: Reply with quote

The IR.exe program has been obsolete for a long time now. We still use RDFs, but we use them with a newer program called RM (Remote Master) and I don't know how backward compatible they are with IR.exe.

When you download RM it comes with all of the RDFs, so no need to try and find the one that you need because it's in there.

Your URC-6131 is a JP1 remote, whereas your 15-134 is a JP1.3 remote. These newer JP1.x remotes are not compatible with your old parallel cable. You'll need to get an FTDI cable (or similar) to program the 15-134.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control