JP1 Remotes

jeajea · Joined: 24 Feb 2010 Posts: 282 Location: USA

Y.D.F 7PORT HDMI SWITCH learns protocol = None
Tried both a URC3660 and a RCRP05B remote.
Tried download with RM 3015 and RM214.
All learns show protocol **None**.
When a learned button is pushed the remote sends something but the switch doesn?t respond.

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26934
_________________
Jim Anderson

The Robman · Posted: Sun Aug 11, 2024 12:42 pm Post subject:

I bet none of these learns actually work, right?

This looks like you are only capturing the repeating portion of an NEC1 signal, you are not capturing the part with the data codes in it. The reason for this is you started pressing the HDMI switch button before you press the URC-3660 button being programmed.

http://www.hifi-remote.com/wiki/index.php/The_Correct_Learning_Procedure
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

jeajea · Joined: 24 Feb 2010 Posts: 282 Location: USA

Thanks
3660 button first fixed the problem.
it's been a while since I needed to learn a remote
_________________
Jim Anderson

The Robman · Posted: Sun Aug 11, 2024 8:01 pm Post subject:

Glad it worked, please don't forget to load your upgrade
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

The Robman · Posted: Wed Oct 02, 2024 1:25 pm Post subject:

@jeajea, did you load an upgrade for the Y.D.F 7PORT HDMI SWITCH ?
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!