This is the JP1 beginners forum. There's no such thing as a stupid question in here, so post away, but this forum is just for JP1 users and people considering JP1, non-JP1 users please use the appropriate forum above!
Moderator: Moderators
rjones99
Posts: 8 Joined: Sat Aug 03, 2024 7:27 am
Post
by rjones99 Tue Aug 06, 2024 9:03 am
New to JP1. I created an upgrade over the weekend for the OSSC (Open Source Scan Converter) remote using Learned Signals. All of the buttons work except two:
* The first (Line Multiplier) would not learn at all on two URC remotes I tried
* The other (Sampling Phase +) learns but doesn't decode and isn't in the ugrade
The two missing buttons are available from the menu so it is still worth having this upgrade IMHO. I don't think anyone else has created this upgrade in a single file for JP1
Can I upload this file and where should I put it to?
FWIW the "IRP from analysis" is
Code: Select all
{38.5k,569,lsb}<1,-1|1,-3>(8892u,-8,A:32,B:1){A=0xe51a857a,B=0x1}
Haven't read enough yet to know what that is, there is a documented Pronto code which produces that.
Hope this is potentially useful
The Robman
Site Owner
Posts: 21902 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Tue Aug 06, 2024 9:44 am
I've not heard of an OSSC before, is it this:
https://www.amazon.com/Source-Converter ... B07QF95QP3
As for where to load it, not really understanding what an OSSC does, the best I can suggest is the "Misc" folder, unless you have a better suggestion:
https://www.hifi-remote.com/forums/dload ... &cat_id=19
Regarding the 2 missing buttons, if you have Pronto code, I can reverse engineer the codes from those. Otherwise, once I see what the upgrade looks like, I might be able to suggest some gaps in the OBCs that you can test to see if those are the codes. Also, I might be able to derive the OBC from the partial learns that you attempted to capture.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
The Robman
Site Owner
Posts: 21902 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Tue Aug 06, 2024 2:32 pm
The backlight button is NEC1, dev 124, OBC 128
All of the codes listed under "L336 and OSSC" on that wiki page are also NEC1, dev 124. I have converted those codes into the following upgrade for you to try:
https://www.hifi-remote.com/forums/dload ... e_id=26932
The codes in your upgrade largely correspond to the codes on this page
https://junkerhq.net/xrgb/index.php?tit ... ips_Pronto
Some of those Pronto codes are incomplete and won't work, and all of them could be cleaned up. Are you involved with this project at all? If I was to give you cleaned up Pronto codes, would that be of benefit to the OSSC community? The following post is what the codes look like cleaned up.
Can you try learning the 2 problematic buttons again (ie, Line Multiplier and Sampling Phase +) and if you can capture anything, let me see your RMIR file with the learns.
Also, the missing "8" button in your upgrade should be OBC 155, which I assume is one of the AV2 (Component) codes.
Last edited by
The Robman on Tue Aug 06, 2024 2:41 pm, edited 1 time in total.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
The Robman
Site Owner
Posts: 21902 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Tue Aug 06, 2024 2:41 pm
OSSC Remote Codes
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
rjones99
Posts: 8 Joined: Sat Aug 03, 2024 7:27 am
Post
by rjones99 Sat Aug 10, 2024 10:06 am
Thanks Rob.
I'm not involved with the OSSC project at all, just a consumer, but i'll see if they want to add this JP1 file and your pronto codes too.
https://www.hifi-remote.com/forums/dload ... e_id=26931 I've bumped this OSSC file to 0.2 and i've added the missing 8 button, the backlight (thanks for that) and Sampling Phase + buttons, which I tried on a new remote and it did finally learn so the only thing missing is one button which is the Linemultiplier Mode which I have captured but doesn't work. Have tried this multiple times on at least two remotes.
What is the best way to send you RMIR with the Learned Signal in? (Thanks)
The Robman
Site Owner
Posts: 21902 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Sat Aug 10, 2024 3:14 pm
rjones99 wrote: the only thing missing is one button, which is the Linemultiplier Mode which I have captured but doesn't work. Have tried this multiple times on at least two remotes.
Load the RMIR file to the Diagnosis Area and then post a link to it here.
https://www.hifi-remote.com/forums/dload ... &cat_id=35 Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
The Robman
Site Owner
Posts: 21902 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Sun Aug 11, 2024 9:37 am
It looks like an NEC1 signal except that it's missing a bit. Try NEC1, dev 56, sub 199, OBC 19.
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
The Robman
Site Owner
Posts: 21902 Joined: Fri Aug 01, 2003 9:37 amLocation: Chicago, IL
Contact:
Post
by The Robman Sun Aug 11, 2024 8:13 pm
Glad it worked, thanks for making the upgrade
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
