| View previous topic :: View next topic |
| Author |
Message |
SysTech_Larry
Joined: 19 Oct 2023
Posts: 145
Location: Northern Wisconsin, USA
|
 Posted: Mon Jul 08, 2024 10:49 pm Post subject: |
 |
|
I put together a cable. Where do I download the RMIR program?
_________________
SysTech Larry |
|
| Back to top |
|
 |
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 634
|
| Posted: Tue Jul 09, 2024 7:02 am Post subject: Onn 6-Device [R113663] Problem... |
|
|
| SysTech_Larry wrote: | | I put together a cable. Where do I download the RMIR program? |
Just to see if things will work
What kind of cable did you purchase/put together ?
Can you give a link to the cable you purchased ?
Can you upload a picture of it?
If you do not know how to upload a picture Read this
http://www.hifi-remote.com/forums/viewtopic.php?t=6557
To read about RMIR and a download link try this
http://www.hifi-remote.com/forums/viewtopic.php?t=103298
If you dont already have it you will also need to install JAVA
I am not sure on this link for java
and others may have a better choice to download or search Java yourself for your operating sustem
https://www.java.com/en/download/manual.jsp
_________________
Randy |
|
| Back to top |
|
|
SysTech_Larry
Joined: 19 Oct 2023
Posts: 145
Location: Northern Wisconsin, USA
|
| Posted: Tue Jul 09, 2024 5:59 pm Post subject: Re: Onn 6-Device [R113663] Problem... |
|
|
| HamburgerHelper1 wrote: | | SysTech_Larry wrote: | | I put together a cable. Where do I download the RMIR program? |
Just to see if things will work
What kind of cable did you purchase/put together ?
Can you give a link to the cable you purchased ?
|
https://www.ebay.com/itm/326134431640
https://www.ebay.com/itm/304102714605
I wired it:
1- red (which was cut)
2- yellow
3- black
4- green
5- blue (which was cut) &
6- white
_________________
SysTech Larry |
|
| Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 634
|
| Posted: Wed Jul 10, 2024 5:48 am Post subject: Onn 6-Device [R113663] Problem... |
|
|
I am not sure on your wiring and we need others to comment on it
But I just searched the pages and found this page that will help
If this is how you wired it , I think it should work
http://www.hifi-remote.com/wiki/index.php/JP1_Cables
_________________
Randy |
|
| Back to top |
|
|
SysTech_Larry
Joined: 19 Oct 2023
Posts: 145
Location: Northern Wisconsin, USA
|
| Posted: Wed Jul 10, 2024 9:08 pm Post subject: |
|
|
I followed these instructions,
| The Robman wrote: | so here's what I did, I went back to Tommy's doc on the FTDI cable and made a note of which color he was attaching to each pin, then I went to the FTDI spec to see what each color wire is, then I went to the ebay listing to see what color coding they use and I got to the right combination, which turns out is the combination that Revwillie posted, so I don't know why it didn't work before, but it works now.
The color codes for the chip_partner cable are:
1 - (empty):VDD
2 - Yellow:RTS
3 - Black:GND
4 - Green:TXD
5 - (empty)
6 - White:RXD
Blue:CTS (not connected)
Red:5V (not connected)
Ok, here's some advice for anyone that tries to add a regular IDC connector onto the end of one of these cables, when you wire it, use all 6 wires (ie, with red on pin 1 and blue on pin 5) then once you've got it clamped down, then snip the red and blue wires. If you snip them beforehand, it's virtually impossible to leave just the right spacing for the 2 missing wires (at least, it was for me). |
...from this thread,
http://www.hifi-remote.com/forums/viewtopic.php?t=16360
_________________
SysTech Larry |
|
| Back to top |
|
|
HamburgerHelper1
Joined: 22 Feb 2014
Posts: 634
|
| Posted: Thu Jul 11, 2024 4:54 am Post subject: Onn 6-Device [R113663] Problem... |
|
|
Sounds like you got it
_________________
Randy |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
