 |
JP1 Remotes
|
| View previous topic :: View next topic |
| Author |
Message |
mdavej
Expert
Joined: 08 Oct 2003
Posts: 4523
|
 Posted: Sat May 18, 2024 10:38 am Post subject: |
 |
|
| Then some sort of tether would be the best solution. |
|
| Back to top |
|
 |
SysTech_Larry
Joined: 19 Oct 2023
Posts: 38
Location: Northern Wisconsin, USA
|
| Posted: Mon May 20, 2024 8:58 am Post subject: Re: EFCs for Roku (TV version) |
|
|
| SysTech_Larry wrote: |
What application opens an .rmdu file...? |
I just looked at that file. The numbers it gives for hex are the mirror image of what my IR tester is getting from my remote (unless it is LSB first).
For instance, it says
the hex for Right Arrow = B4.
Binary = 1011 0100.
The mirror image = 0010 1101.
Hex = 2D.
That is what my tester reads when I press the Right Arrow key.
The OBCs from my remote remain <128. The mirror-image hex does not.
It is missing HDMI4, Home (duplicate) and three other keys.
_________________
SysTech Larry |
|
| Back to top |
|
|
mdavej
Expert
Joined: 08 Oct 2003
Posts: 4523
|
| Posted: Mon May 20, 2024 11:06 am Post subject: |
|
|
Try OBC 36 for HDMI4 and OBC 3 for Home. You'll have to find the others by trial and error. Looks like the following OBCs are good candidates to try:
1-2,5-7,14,17-20,29,31,38-40,48-50,55-63,81,83,92,94,100,103,113,115,117-118,121-126 |
|
| Back to top |
|
|
SysTech_Larry
Joined: 19 Oct 2023
Posts: 38
Location: Northern Wisconsin, USA
|
| Posted: Mon May 20, 2024 7:47 pm Post subject: |
|
|
| mdavej wrote: | Try OBC 36 for HDMI4 and OBC 3 for Home.* You'll have to find the others by trial and error. Looks like the following OBCs are good candidates to try:
1-2,5-7,14,17-20,29,31,38-40,48-50,55-63,81,83,92,94,100,103,113,115,117-118,121-126 |
Thank you. I already have HDMI4 & HOME2.
I have three that are undefined (using the questionable hex format in the above file):
- 80 (01 at remote)
- 40 (02)
- 5C (3A)
The TV acknowledges them, but they do nothing obvious. I was hoping that file would give those functions a name.
*In the OP's file, HOME is Function #22 with an incorrect OBC = 192 [Hex = C0].
_________________
SysTech Larry |
|
| Back to top |
|
|
mdavej
Expert
Joined: 08 Oct 2003
Posts: 4523
|
| Posted: Tue May 21, 2024 1:48 pm Post subject: |
|
|
You are making a false equivalence between the hex column and OBC. The hex column is not the hex value of the OBC, it's the reverse, as you've discovered.
The OP's OBCs are correct. The hex is not limited to 128, the OBCs are. Hex C0 is equivalent to decimal OBC 3. There are no OBCs > 128 in the master file, so all are valid.
In your Right Arrow example, the OBC in the file is 45 decimal which is indeed 2D. So you need to equate your codes to the hex value of the OBC, NOT the hex shown in the hex column in Remote Master which is the OBC in reverse. That means your missing commands would have the following OBCs, none of which are in the current file:
| Code: | Larry
Hex OBC
01 01
02 02
3A 58 |
So if you figure out what they do, we'll add to the file according to the OBCs above. |
|
| Back to top |
|
|
SysTech_Larry
Joined: 19 Oct 2023
Posts: 38
Location: Northern Wisconsin, USA
|
| Posted: Wed May 22, 2024 12:58 am Post subject: |
|
|
| mdavej wrote: | You are making a false equivalence between the hex column and OBC. The hex column is not the hex value of the OBC, it's the reverse, as you've discovered.
The OP's OBCs are correct. The hex is not limited to 128, the OBCs are. Hex C0 is equivalent to decimal OBC 3. There are no OBCs > 128 in the master file, so all are valid.
In your Right Arrow example, the OBC in the file is 45 decimal which is indeed 2D. So you need to equate your codes to the hex value of the OBC, NOT the hex shown in the hex column in Remote Master which is the OBC in reverse. That means your missing commands would have the following OBCs, none of which are in the current file:
| Code: | Larry
Hex OBC
01 01
02 02
3A 58 |
So if you figure out what they do, we'll add to the file according to the OBCs above. |
Thanks for the clarification.
The hex for OBC numbers 1, 2 & 58 should be 80, 40 & 5C, then.
That is counterintuitive but I accept that at face value.
(The hex values that I reported are what my IR tester shows for OEM & URC remotes in my possession. They happen to be the hex values of stated OBCs.)
_________________
SysTech Larry |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21279
Location: Chicago, IL
|
| Posted: Wed May 22, 2024 9:47 am Post subject: |
|
|
| SysTech_Larry wrote: | Thanks for the clarification.
The hex for OBC numbers 1, 2 & 58 should be 80, 40 & 5C, then.
That is counterintuitive but I accept that at face value.
(The hex values that I reported are what my IR tester shows for OEM & URC remotes in my possession. They happen to be the hex values of stated OBCs.) |
Larry, please keep in mind that the JP1 hex codes are not designed to be intuitive, they are just the hex code that is required to make the executors work. If you want things to be intuitive, stick to OBCs, that's why we display them.
Normal JP1 users have no need to even deal with hex codes.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
SysTech_Larry
Joined: 19 Oct 2023
Posts: 38
Location: Northern Wisconsin, USA
|
| Posted: Wed May 22, 2024 4:06 pm Post subject: |
|
|
| The Robman wrote: |
Normal JP1 users have no need to even deal with hex codes. |
Understood, but I normally leave my OBCs in hex format (rather than convert it to dec each time) because that is the way my IR tester presents them. Should I call that HOBC so they will not be misconstrued as the other kind of hex?
_________________
SysTech Larry |
|
| Back to top |
|
|
mdavej
Expert
Joined: 08 Oct 2003
Posts: 4523
|
| Posted: Wed May 22, 2024 5:18 pm Post subject: |
|
|
I would prefer OBC (hex) or OBC in hex. HOBC would only baffle us.
But thanks for sharing your codes. As long as we eventually understand each other, its all good. |
|
| Back to top |
|
|
SysTech_Larry
Joined: 19 Oct 2023
Posts: 38
Location: Northern Wisconsin, USA
|
| Posted: Wed May 22, 2024 6:35 pm Post subject: |
|
|
I know what OBC is mathematically speaking, but may I ask what it stands for?
_________________
SysTech Larry |
|
| Back to top |
|
|
SysTech_Larry
Joined: 19 Oct 2023
Posts: 38
Location: Northern Wisconsin, USA
|
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21279
Location: Chicago, IL
|
| Posted: Thu May 23, 2024 8:13 am Post subject: |
|
|
| SysTech_Larry wrote: | | I know what OBC is mathematically speaking, but may I ask what it stands for? |
Original Button Code
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
