View previous topic :: View next topic |
Author |
Message |
sergro
Joined: 21 May 2004 Posts: 9
|
Posted: Wed May 26, 2004 7:55 am Post subject: Kameleon URC 9960 Help JP1 |
|
|
I would want to know if this message is normal when I carry out the test in order to try the operation of my new interface:
No response from the remote. Make sure your Interface is plugged into JP1 properly.
Is normal this message ?
Thanks |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Wed May 26, 2004 8:33 am Post subject: |
|
|
No, this is not normal but I need more info to help.
1) What kind of cable - Simple or ultra or USB or serial
2) Is the remote modified with the pins added or using pogo adapter
3) Has it ever worked?
4) Has the cable worked with other remotes
5) Have you tried without the batteries
6) Have you tried reversing the connection to the remote
7) Have you read the diagnostic information on testing the interface
Some other comments/questions will be based on your answers. _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
|
Back to top |
|
|
|