URC7955 BT112-Dongle - no Upload after extender installation

earth__22 · Post by **earth__22** » Thu Mar 09, 2023 9:38 am

Hi,
I have conencted my urc7955 via bluetooth (BT112) and installed the bluetooth extender V1.00 (hex-file) successfully.
Upload to remote is still disabled.
After reconnect via bluetooth the RMIR says:
Please not that this remote needs an extender in order to support uploading via its Bluetooth interface.

So do i need V2.0 of extnder (rmir-file)? So I have to upload this rmir via cable? because upload is disabled...

Thanks for your support.

Post by **mathdon** » Thu Mar 09, 2023 11:42 am

I take it that when you say the extender installed successfully, you do mean that when you pressed Power with TV/1800 as the selected device, you got two flashes of the LED as described in the ReadMe. If so and RMIR still reports that you need an extender, then something is wrong.

You should not need v2.0 of the extender to work with the dongle. When you get that message, please close RMIR and post the rmaster.err file (in your RMIR installation folder) to me to look at, to see if that gives any clue as to what is wrong.

earth__22 · Post by **earth__22** » Thu Mar 09, 2023 2:04 pm

Hi,
thanks for the hint that two flashes must occur at the LED, repeated the installation and now it works, download AND upload.

Thank you for your fast reply.

/Alex