JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

nothing
Goto page Previous  1, 2, 3 ... 11, 12, 13
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Hardware
View previous topic :: View next topic  
Author Message
joegovernale



Joined: 26 Jun 2005
Posts: 17

                    
PostPosted: Sun Feb 20, 2022 6:04 am    Post subject: Reply with quote

It's been years since I've done more than device updates or key moves, my last JP1.x cable failed and needs to be replaced. I would like to confirm before I go through the effort, the following cable is the correct choice as a JP1.x cable for use with OCAP Atlas remotes correct? https://www.amazon.com/gp/product/B014GZTCC6/ref=ox_sc_saved_title_1?smid=A28JUS3SJ1A0RV&th=1

I'm planning on using "AN EASIER WAY TO BUILD YOUR OWN JP1.2/3 (FLASH) INTERFACE" by Tommy Tyler as the wiring reference. Any comments or suggestions would be appreciated.
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 4500

                    
PostPosted: Sun Feb 20, 2022 8:43 am    Post subject: Reply with quote

That cable should work fine.
Back to top
View user's profile Send private message
joegovernale



Joined: 26 Jun 2005
Posts: 17

                    
PostPosted: Wed Feb 23, 2022 7:33 am    Post subject: Reply with quote

Confirmed:
https://www.amazon.com/gp/product/B014GZTCC6/ works great.
The connector/cable wire colors:
2/Yellow
3/Black
4/Green
6/White
Connector pins 1 & 5 are unused

Another Harmony remote goes unsold.

@mdavej, Thanks for the confirmation.
Back to top
View user's profile Send private message
joegovernale



Joined: 26 Jun 2005
Posts: 17

                    
PostPosted: Wed Nov 29, 2023 7:24 am    Post subject: Another FTDI module source Reply with quote

Confirmed that the FT232RL FTDI module from TEMU is another viable source for a  working interface cable. A TEMU search for "FT232RL" finds various vendors/prices. The board is a mini USB female to male header pins and through hole solder pads for the remote connections.  I used TEMU's DuPont 40 pin female to female breadboard cable kit to make up the remote-side plug. RTS requires either adding a pin or soldering to through hole pad on the board.
Connections to the remote pins below:
Pin 2  RTS
Pin 3  GND
Pin 4  TXd
Pin 6  RXd
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Hardware All times are GMT - 5 Hours
Goto page Previous  1, 2, 3 ... 11, 12, 13
Page 13 of 13

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control