Channel Master Stream+ CM-7600

panosb · Post by **panosb** » Sat Oct 10, 2020 5:00 pm

Hi guys, I'm looking for the remote bin file to put into my sling box..
Please help

alanrichey · Post by **alanrichey** » Sun Oct 11, 2020 1:10 am

Try this one http://www.hifi-remote.com/forums/dload ... e_id=26096

panosb · Post by **panosb** » Sun Oct 11, 2020 8:23 am

Thanks for your reply

I tried that file and it comes back custom remote code not found please try another code

alanrichey · Post by **alanrichey** » Sun Oct 11, 2020 9:41 am

Looks you aren't following the installation instructions I link to in the Readme file. Try again using those.

panosb · Post by **panosb** » Sun Oct 11, 2020 10:08 am

I've done this before and it worked on a different DVR,it just doesn't like this particular file and yes I know it is case sensitive

alanrichey · Post by **alanrichey** » Sun Oct 11, 2020 10:19 am

But Sling have changed the whole procedure. Also my instructions explain most of the error messages. It's up to you of course, but I can only help if you follow my instructions.

Post by **The Robman** » Sun Oct 11, 2020 10:36 am

Read this...
http://www.hifi-remote.com/forums/viewtopic.php?t=17119

panosb · Post by **panosb** » Sun Oct 11, 2020 10:59 am

I have downloaded the file for CM7003 that has the exact same name V2010
and it does allow me to go through the installation with no error codes. The above file will not run the cm7600 though

alanrichey · Post by **alanrichey** » Sun Oct 11, 2020 12:24 pm

OK, tell me how far you get through the instructions and at what point things go wrong.

panosb · Post by **panosb** » Sun Oct 11, 2020 12:54 pm

My slingbox is a sb260 that has different menu options then your instructions...

The instructions that always worked for me are

"Put the right file into your C:\Program Files\Sling Media\Slingplayer\SBAV\ folder (For the Mac it is /Applications/SlingPlayer/Contents/Slingbox Setup Assistant/Contents/Resources/SBAV/).

If you are not sure which Slingbox you have then put both files in.

Now go into the Slingbox and run the Audio/Visual setup again using Cable as the device type.

This time use 'Other' as the brand and in the next screen use scroll to the bottom of the Code numbers, select 'Custom' and then type C2010 (NOT c2010, the code is case-sensitive) in the newly appeared Custom Code window. Then complete the setup as normal (In Slingplayer 1.5, you do not need to scroll down the codes, simply type C2010 in the Alternative Code window)."

alanrichey · Post by **alanrichey** » Sun Oct 11, 2020 1:20 pm

No it isn't. The 3rd option is to install BIN files onto an older legacy Slingbox and that is exactly what you have.

panosb · Post by **panosb** » Sun Oct 11, 2020 2:08 pm

This whole time I've been using Slingplayer for windows instead of Slingplayer desktop...
Now I can go through all the steps and uploaded the V2010_PL.bin..
The remote buttons do not work

Post by **The Robman** » Sun Oct 11, 2020 2:34 pm

Did you notice anything in any of the instructions that you read that mentioned anything about whether saying "it does not work" is a good reply or not? And did you notice anything about a list of questions that we need answers to in order to know how to help you? I know you said you read everything, so I'm guessing you saw both of those. Any particular reason you felt it didn't apply here?

alanrichey · Post by **alanrichey** » Sun Oct 11, 2020 2:40 pm

So, not only did you ignore the part of the instructions that is marked IMPORTANT and is highlighted in Red, but you also ignored the instruction that with a Slingbox Solo you should try the RV file as well, and you also ignored Rob's post asking you to read the post at his link. I give up I'm afraid, life's too short.

Later : Sorry, crossed with Rob's post. He put it more diplomatically

panosb · Post by **panosb** » Sun Oct 11, 2020 2:51 pm

I would like to apologize to both of you ...