View previous topic :: View next topic |
Author |
Message |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Mon Dec 09, 2019 6:41 pm Post subject: TDC-38 Official - protocols.ini entry |
|
|
Is the entry for this executor correct? It appears that the LSB of the sub-device code falls outside of the fixed data, so 2 different sub-device codes result in the same hex code (ie, 10 and 11 are the same, likewise for 12 and 13, etc). _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mathdon Expert
Joined: 22 Jul 2008 Posts: 4523 Location: Cambridge, UK |
Posted: Tue Dec 10, 2019 5:27 am Post subject: |
|
|
Rob, you need to look at the translators in the protocols.ini entry to see what is going on. There is the line
Code: | CmdTranslator=TranslatorFromDev(1,1,0) Translator(0,7,1) |
which shows that the LSB of the sub-device is encoded in the variable byte, not the fixed bytes. _________________ Graham |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21234 Location: Chicago, IL |
Posted: Tue Dec 10, 2019 8:26 am Post subject: |
|
|
Ah, good to know. I've been reading protocols.ini a LOT recently but I missed that line. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|