JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Transport PunchThrough on Titan URC-2056-CXX

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
DDE12



Joined: 13 Oct 2014
Posts: 82
Location: United States

                    
PostPosted: Sat Oct 19, 2019 5:26 pm    Post subject: Transport PunchThrough on Titan URC-2056-CXX Reply with quote

I have a 2056-CXX (model # in the battery compartment is 2056BC1-CXX) that came with my Cable system. For the TV device button I have PunchThrough set to none for Volume, Transport, and Channel. I have none set for all devices for Transport PunchThrough. When in TV device, generally all the buttons on the bottom half of the remote works for the TV (TV device button lights when pressed). All the buttons on the top half of the remote send command for the STB and the STB device lights up. I recently purchased a 2056-ISX (model # in the battery compartment is 2056ABC0-ISX). "Out of the box" the ISX does not have the mysterious PunchThrough issue that the CXX does but when I download from the the CXX and upload that to the ISX, the PunchThrough issue occurs. The other Device modes are respecting the settings I have in RMIR. Does anyone have thoughts on removing the hidden Transport PunchThrough on the TV device mode so that I can have full control of the TV with the URC? Thank you!
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat Oct 19, 2019 5:48 pm    Post subject: Reply with quote

Upload a copy of each RMIR file, one with the punch thru and one without, to the Diagnosis Area and then post a link to it here.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
DDE12



Joined: 13 Oct 2014
Posts: 82
Location: United States

                    
PostPosted: Sat Oct 19, 2019 7:53 pm    Post subject: Reply with quote

Attached zip file here http://www.hifi-remote.com/forums/dload.php?action=file&file_id=25677
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat Oct 19, 2019 9:02 pm    Post subject: Reply with quote

I can't tell what's causing this from the data shown, but I do see some "unknown" segments in there. Maybe one of the segments experts can take a deeper look.

If you say that the ISX remote does not have the punch thru issue, what happens if you load the ISX file into the CXX remote, does the CXX no longer have the punch thru issue? If so, I would suggest that you use the ISX file as a starting point and then re-configure it to match the CXX file.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
DDE12



Joined: 13 Oct 2014
Posts: 82
Location: United States

                    
PostPosted: Sat Oct 19, 2019 9:53 pm    Post subject: Reply with quote

Uploading the ISX to the CXX worked. I was hesitant to do that because when I initially programmed the CXX, it would crash/brick and I would have to start over with the cable company's instructions to reset. I discovered that if I only made a few changes, uploaded those changes, immediately downloaded those changes, and the made a few changes to the most recently download, I could avoid crashing it. Maybe there's something off in the cable company's programming that's causing all of these problems.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat Oct 19, 2019 10:45 pm    Post subject: Reply with quote

I did notice that there are a TON of device upgrades in both remotes, most of which which I'm guessing that you didn't put there. You could try deleting some of them. Again, maybe 1 or 2 at a time to avoid crashing it.

Another other trick is to always save a new version of your RMIR file after making changes, so you can always revert to a previous version if it crashes.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
DDE12



Joined: 13 Oct 2014
Posts: 82
Location: United States

                    
PostPosted: Tue Oct 22, 2019 6:31 pm    Post subject: Reply with quote

I suspect those upgrades are for the various cable boxes that use this remote.

I did do what you recommended when I was setting up the CXX but if I did something it didn't like, it would not even accept the most recent "save". I ended up adding one upgrade at a time and then one macro or key move at a time and finally got it set up. It was very annoying.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Tue Oct 22, 2019 6:48 pm    Post subject: Reply with quote

I can totally imagine. Hopefully somebody with greater expertise on this will have some clue what might have been going on.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control