Barf Expert
Joined: 24 Oct 2008 Posts: 1414 Location: Munich, Germany |
Posted: Tue Apr 09, 2019 5:53 am Post subject: |
|
|
If you are posting a file, post all of it, and use the Code formatting, or upload to the diagnostic area.
The method of transferring Fs like you do is really error prone, better is this method.
I did that, selected the NEC1 executor, and came up with the rmdu file enclosed.
Finally, you appears to be using an Raspberry Pi, and then probably the /dev/lirc interface. IrScrutinizer can capture directly from that device, just select /dev/lirc as capturing (an sending hw). Although irrecord seemed to do the job...
Code: |
Description=unnamed
Remote.name=Slingbox with UEI PL Chip
Remote.signature=BINPL
Notes=Export from IrScrutinizer\n\nOriginal protocol\: nec1
DeviceType=Cable
DeviceIndex=1
SetupCode=1999
Protocol=00 5A
Protocol.name=NEC1
ProtocolParms=1 null null 0 0
FixedData=00 7F 00
Notes=Export from IrScrutinizer\n\nOriginal protocol\: nec1
Function.0.name=KEY_0
Function.0.hex=7D
Function.1.name=KEY_1
Function.1.hex=0D
Function.2.name=KEY_2
Function.2.hex=2D
Function.3.name=KEY_3
Function.3.hex=1D
Function.4.name=KEY_4
Function.4.hex=8D
Function.5.name=KEY_5
Function.5.hex=AD
Function.6.name=KEY_6
Function.6.hex=9D
|
|
|