View previous topic :: View next topic |
Author |
Message |
filister
Joined: 13 Apr 2017 Posts: 3
|
Posted: Fri Jul 14, 2017 10:19 am Post subject: IR codes for Slingbox ProHD |
|
|
Hi guys,
I want to create a bin file with the RC codes for my remote control. The problem is that I have the codes for all the buttons, but I don't know how I can export them to a bin format. The key codes are 38KHz NEC 0xE41A. A picture of the RCU could be found at http://imgur.com/WNaWaDG I also have a learning remote control Terris UFB 244 which has a USB interface for connection to a PC but didn't find a way to connect it to any of the programs listed in this forum. Any hints how I can do that would be greatly appreciated.
My last hope is eventually to use a microphone with winLirc. So if you have any advices or detailed instruction how I can convert the codes from WinLirc to the Slingbox format, let me know.
Thanks in advance.
Last edited by filister on Tue Jul 18, 2017 7:37 am; edited 2 times in total |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Fri Jul 14, 2017 11:20 am Post subject: |
|
|
IR Scrutinizer will convert Lirc to Slingbox (Remote Master) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Fri Jul 14, 2017 11:28 am Post subject: |
|
|
What is the make and model of the device that you wish to control? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
|
Back to top |
|
|
filister
Joined: 13 Apr 2017 Posts: 3
|
Posted: Sat Jul 15, 2017 1:17 am Post subject: |
|
|
Thank you very much guys, the box is Openview HD. I will test the bin file which you prepared and let you know if it works. By the way how did you prepare the bin file only from the hex codes? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Sat Jul 15, 2017 8:56 am Post subject: |
|
|
filister wrote: | By the way how did you prepare the bin file only from the hex codes? |
It wasn't just hex codes, that remote image also said that the protocol was NEC. Now, we have several different formats of NEC, but NEC1 is the more common, so I took a guess there. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
filister
Joined: 13 Apr 2017 Posts: 3
|
Posted: Tue Jul 18, 2017 3:07 am Post subject: |
|
|
the codes work very well, I have tried the numbers, exit, guide, menu, arrow up, down, left, right, ch+, ch- and all worked. I didn't find a back button on the virtual remote, but this is not a big deal for me and initially when I tried to upload the bin file it showed me an error about unable to load the custom codes, but when I restarted the setup process the codes were already loaded and it was working OK.
Anyway, thanks again for your support. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Tue Jul 18, 2017 7:36 am Post subject: |
|
|
I put "back" on both the EXIT and PREV CH buttons. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|