JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Lasko fan (almost F12 protocol)
Goto page Previous  1, 2
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Sat Jun 24, 2017 1:31 pm    Post subject: Reply with quote

The Robman wrote:
Are you going to fix the files Vicky?

Yes I will. I've been crazy busy lately. I need to have quiet time where I can check and double check my work. i don't want to screw anything up!!
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
vickyg2003
Site Admin


Joined: 20 Mar 2004
Posts: 7073
Location: Florida

                    
PostPosted: Sun Jun 25, 2017 5:04 am    Post subject: Reply with quote

Okay, these Lasko upgrades were reviewed, the PB file and the file that uses Nec1 were not changed. The others had the initial branch changed so it doesn't jump into the data.

Remote Master :
Lasko column fan (Hmm this one was configured for a JP1.2 remote, downloaded 102 times no problems reported
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=11049

Keymaster Files
Lasko 5132 Heater
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=6983

Lasko_3440_fan (uses Nec1 , no change)
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4100

Lasko Colunn Fan
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=238

Protocol Builder files:
Lasko column fan - no change required
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4087
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Back to top
View user's profile Send private message Visit poster's website
Impeeza



Joined: 03 Mar 2016
Posts: 15

                    
PostPosted: Mon Dec 28, 2020 8:27 pm    Post subject: Thanks Reply with quote

Thanks a lot for your help, it works perfect for my Samurai (Colombia imported Chinese no brand) Vertical Fan just add the "Function" button and all the remote is functional now.

The learning function Keeps interpreting as a F12 but doesn't work, this new protocol work like a charm.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Tue Dec 29, 2020 9:35 am    Post subject: Reply with quote

If you had to add the Function button to complete the upgrade, could you load your upgrade please.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Impeeza



Joined: 03 Mar 2016
Posts: 15

                    
PostPosted: Tue Dec 29, 2020 9:46 am    Post subject: Reply with quote

Hi, already posted:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26197

Giving the proper recognition to original fellow.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Tue Dec 29, 2020 10:16 am    Post subject: Reply with quote

Perfect, thank you
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
bone450



Joined: 12 Mar 2006
Posts: 12

                    
PostPosted: Fri May 05, 2023 10:07 am    Post subject: Reply with quote

I have a OARUSB04G 4000 remote, which appears to have an incompatible processor (MAXQ610 series) with the Lasko upgrades in the files section. The learned signals work fine on the remote, just can't make a device upgrade as it maps to "F12" protocol that doesn't control the fan.

The learned signals have been posted here: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26718

Could the protocol update be added for the MSXQ610 processor?
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Fri May 05, 2023 10:29 am    Post subject: Reply with quote

I'll work on it this weekend.
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat May 06, 2023 1:32 pm    Post subject: Reply with quote

I used RMIR 2.14.18 and the decode was F12x. Using 2.13.6 gave a decode of F12. So I suspect your version of RMIR is more than a year old. See http://www.hifi-remote.com/forums/viewtopic.php?t=102988 from February 2022 when F12x was added to RMIR.

Anyway, the problem is likely not a missing executor for the MaxQ processors. F12x is sent by PID 016D, and a MaxQ version is included in Protocols.ini.

Converting to a device upgrade will probably work, but your learned signals aren't exactly F12x. F12x sends, as usual, device, subdevice, and OBC data repeatedly, but the very last repeat uses a different OBC value. This OBC2 is the same for all the functions. At present, a F12x upgrade will use a value of 0 for OBC2. I suppose (hope) that your fan will ignore this last burst when you release the button.

If the upgrade you make using a newer version of RMIR doesn't work, I'll have one more thing for you to try. If necessary, I'll make a custom executor to match your learned signals exactly.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sat May 06, 2023 1:58 pm    Post subject: Reply with quote

3FG wrote:
I used RMIR 2.14.18 and the decode was F12x. Using 2.13.6 gave a decode of F12. So I suspect your version of RMIR is more than a year old. See http://www.hifi-remote.com/forums/viewtopic.php?t=102988 from February 2022 when F12x was added to RMIR.

It's also possible that he has the "IR Decoder" set to "DecodeIR". I have RMIR 2.14.18 also and when I first opened the file, I got no protocol decoded, then I switched the IR decoder to IrpTransmogrifier and got the F12x decodes.

I have created an upgrade using F12x using the learns posted above:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=26719
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sat May 06, 2023 4:30 pm    Post subject: Reply with quote

Yeah, I lost an earlier version of my post that recommended checking for the correct decoder.

Note that the F12x protocol executor doesn't send the exact IR signal as the learns, so we still need verification if the upgrade actually works for the Lasco fan.
Back to top
View user's profile Send private message
bone450



Joined: 12 Mar 2006
Posts: 12

                    
PostPosted: Sat May 06, 2023 6:01 pm    Post subject: Reply with quote

Sorry for the run around guys, I was using Remote Master V2.11. Updated to V2.14.18 and everything worked fine converting the learned signals to the device upgrade.

Robman your upgrade worked also.

I did try the two different decoders before I posted initially, but with the old remote master version it made no difference.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control