View previous topic :: View next topic |
Author |
Message |
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Fri May 05, 2017 7:51 pm Post subject: |
|
|
>> even a good flash cable won't work with older JP1 remotes, it will just work with JP1.x remotes <<
Anyone know that JP1 version the Inteset 422-3 uses?
Inteset's response is that "while the unit has a JP1 connector, they don't support it's use" I did note that the Inteset 422-3 was listed in RMIR's remote list.
Somewhere here I have my old LPT1: cable and somewhere else I have an old windows box that has an LPT1: port... silly me, thought I was not going to have to go down that route ;-)
Beverly Howard |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Sat May 06, 2017 8:19 am Post subject: |
|
|
Nobody supports the use of JP1 but us since it is a hack.
All Intesets are JP1.3 or newer. No problem with any fuctioning JP1.x cable. Your old LPT1 cable definitely won't work. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat May 06, 2017 5:55 pm Post subject: |
|
|
Bev, what JP1 capable remotes do you have? In all likelihood, unless you have some old remotes still in service, you won't need that LPT1 cable or your old Windows box.
The older style JP1 remotes, the kind that would work with your LPT1 cable, haven't been made or sold in many years, but having said that, I still have several in service.
All JP1 capable remotes sold now are either JP1.x or USB remotes, so they will work with the ebay cable that we recommended or that will work with a standard USB cable. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Sat May 06, 2017 9:07 pm Post subject: |
|
|
Yep... the current goal is to obtain a functional JP1.x cable... I have one in front of me, but it appears to be a non starter.
Thanks for the background on the JP1 versions... I still have two functioning JP1 remotes that were programmed using the LPT1 cable, but I am ready to leave them behind when I have working replacements.
I am looking at the used cable currently listed on this site and will likely purchased that unless shipping is prohibitive.
Beverly Howard |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat May 06, 2017 9:43 pm Post subject: |
|
|
But don't give up on your OARUSB04G too soon, it's a very decent remote and doesn't require a JP1 cable. You could also get a very fancy Nevo C2 on ebay for under $20 shipped and it also doesn't require a JP1 cable. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Sun May 07, 2017 10:27 am Post subject: |
|
|
And are you sure you don't want to do at least a little troubleshooting with your current cable? You probably just have the wrong driver. Post a link to the exact one you bought. |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Sun May 07, 2017 12:31 pm Post subject: |
|
|
>> troubleshooting with your current cable? <<
I'm open for anything.
>> You probably just have the wrong driver. <<
What driver?
None was included in shipment, but, more telling, the pc does not respond when the cable is connected to a usb port.
If there were drivers, I would assume that I would have the option to update them in device manager when the cable achieves a valid connection.
I would also expect (hope) that something like this would (should) use windows default usb drivers.
>> Post a link to the exact one you bought. <<
http://www.diygadget.com/jp1-1-1-1-2-1-3-cables/jp1-2-1-3-flash-usb-cable-for-universal-remotes.html
The vendor has responded once to a trouble ticket only to ask if the device was visible in device manager (despite the fact that the question had been addressed in the original request.) That was three days ago with no follow up response. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Sun May 07, 2017 1:01 pm Post subject: |
|
|
Unfortunately you bought the old version without plug and play drivers. I'll post the driver when I get home later this afternoon. That red part at the bottom of his listing points to the newer/better cable. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Sun May 07, 2017 2:04 pm Post subject: |
|
|
>> That red part at the bottom of his listing... <<
That was well hidden.
I found a zip containing this;
>>
ZIP JP1.2-1.3_USB_CABLE_DRIVER_INSTALLER
TIAO's USB to JP1.2/1.3 Cable driver. This driver supports all Windows OS, including XP, Vista, 7, 8, 8.1, server 2008 and server 2012 1/5 3,905 Aug 19, 2009
<<
But, while it installed, cable is still not functional.
The "check chip version" exe in the zip also comes up empty.
Questions
The Inteset connector does not have any obvious orientation marks... the pin numbers are there, but, assuming that the "notch" on the original JP1 connectors marks pin1, the Inteset header shows pin1 to be opposite (below) that position.
Thanks for the above and beyond on this,
Beverly Howard |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Sun May 07, 2017 2:39 pm Post subject: |
|
|
Where should one look in device manager for these cables?
Beverly Howard |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Sun May 07, 2017 2:46 pm Post subject: |
|
|
You found the driver I was going to post (TIAO), but some of their cables do use the Prolific driver.
I don't have that cable, but mine shows up under Ports in Win 10.
EDIT: Looks like the TIAO and Prolific drivers are one in the same.
As for the mark for pin 1, there are no guarantees DIY made any attempt to put their pin 1 on that mark. So try both orientations.
Last edited by mdavej on Sun May 07, 2017 3:36 pm; edited 1 time in total |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sun May 07, 2017 3:20 pm Post subject: |
|
|
Bev, could you post a link the driver that you found please. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
bevhoward
Joined: 24 Jun 2005 Posts: 248
|
Posted: Mon May 08, 2017 3:38 am Post subject: |
|
|
>> I don't have that cable, but mine shows up under Ports in Win 10 <<
That's what I would have expected, but there is no "ports" entry in my device manager.
>> post a link the driver that you found please <<
http://www.tiaowiki.com/download//category.php?id=2
I installed the 5th package and no go.
I also tried the 3rd package, but windows complained and aborted.
I can't sleep, so, I'm going to tinker for a while and will report back.
>> As for the mark for pin 1, there are no guarantees DIY made any attempt to put their pin 1 on that mark. So try both orientations. <<
I assume the Interset header has worked for someone.
The orientation question is not only "reversing" but, assuming pin one is on the corner with the notch, on the Interset the pin _below_ the notch is marked as "1" on the pcb... that's not just "reversed" but, rather "mirrored"
Beverly Howard |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Mon May 08, 2017 8:59 am Post subject: |
|
|
bevhoward wrote: | The orientation question is not only "reversing" but, assuming pin one is on the corner with the notch, on the Interset the pin _below_ the notch is marked as "1" on the pcb... that's not just "reversed" but, rather "mirrored" |
UEI only configures their 6-pins in one way, the only variable is which way up is it, and most DIY cables don't have pin 1 marked, so basically you try it one way, then rotate it 180 degrees and try it again. There is no "mirrored" possibility. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|