Xsight/Nevo firmware and config reliant on ez-rc.com?

Since EZ-RC has closed down, JP1 is your only option to get these remotes upgrades. We will (eventually) support all remotes formerly supported by EZ-RC, including the Moster Revolution 200.

Moderator: Moderators

unclemiltie
Expert
Posts: 1819
Joined: Wed Jan 21, 2004 12:50 pm
Location: Pittsburgh, PA

Post by unclemiltie »

Hey Rob

I know in the past you used to have some connections at UEI. Wonder if they'd go for a "we'd like to redirect ez-rc.com to hifi-remote.com, talk about the support for the remote from our open-source tools but we need a way to do the firmware upgrades. Can you give us that info and we'll take over the self-support for people who have the remotes"

They might find that's a good way to go instead of dropping the customers entirely.
this JP1 stuff is a sickness!
jetstar52
Posts: 177
Joined: Thu Oct 16, 2003 7:34 pm
Location: Sacramento, CA

Post by jetstar52 »

My Nevo c2 gives a firmware version of 1.3.33. Is that the latest version?
I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything!
mdavej
Expert
Posts: 4631
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Latest is 1.3.32 for Xsight and 1.3.33 for Nevo.
jetstar52
Posts: 177
Joined: Thu Oct 16, 2003 7:34 pm
Location: Sacramento, CA

Post by jetstar52 »

Thanks!
I used to have 5 remotes that controlled one thing each. Now I have 6 remotes that each control everything!
brlamnr
Posts: 3
Joined: Mon Apr 24, 2017 12:34 pm

Post by brlamnr »

As some other users, I just got a C2 from one of the chinese sites, the ez-rc.com site, even though still up no longer has the option to register new users (05/14/2017) . Any workarounds on how to upgrade the firmware?
chuliu
Posts: 454
Joined: Sat Dec 04, 2010 10:44 am
Location: Hong Kong

Post by chuliu »

Even though I got the email from ofa about they would stop the ez-rc.com site, I confirm I can still update firmware to my c2 that I ordered off ebay.
I was ready to live with an older firmware, but I decided to give it a try to update the firmware on the site anyway. Luckily it went through.
bob187
Posts: 6
Joined: Wed May 17, 2017 5:38 pm

xsight Color

Post by bob187 »

anyone willing to share a login ?
I just bought one and it is on 1.2 with some issues would like to update.
Post Reply