View previous topic :: View next topic |
Author |
Message |
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Mon Dec 19, 2016 7:19 am Post subject: |
|
|
Actually, forget the Nevo C2, it looks like the software has been removed.
If I try http://ez-rc.com I get redirected to http://www.uei.com/ and although they talk about the Nevo I cannot see how to access the setup software. Anyone any idea ? |
|
Back to top |
|
|
Knuckx
Joined: 15 Jul 2015 Posts: 66 Location: UK |
Posted: Mon Dec 19, 2016 8:14 am Post subject: |
|
|
Alan: try http://www.ez-rc.com/Pages/LogOn/UserLogOn.aspx
That said, it now has the following ominous banner across the top "This application is going to be deprecated soon. Try something new till we make timing announcements."
I think we may want to start grabbing everything we can from it, and removing any/all dependence we have on it. Can we do a fimware update without it? _________________ In Use: 3x URC7781 / 2x Nevo C2 / Harmony PS3 -|- Learner: Nevo C2 |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Mon Dec 19, 2016 8:40 am Post subject: |
|
|
I think we might be too late. I found that site, and a standalone version called conduit.exe but both of them will ONLY run on IE7 or IE8, and neither of those will run under Windows 10. So I am screwed, as all my computers have been upgraded.
It does look as though the new 'MyNevo' app might be the way forward, although you can only run it in Chrome, but again I can find no way of updating the settings on my Nevo. |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Mon Dec 19, 2016 11:25 am Post subject: |
|
|
Starting to get too complicated |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Mon Dec 19, 2016 3:00 pm Post subject: |
|
|
alanrichey wrote: | I think we might be too late. I found that site, and a standalone version called conduit.exe but both of them will ONLY run on IE7 or IE8, and neither of those will run under Windows 10. So I am screwed, as all my computers have been upgraded.
It does look as though the new 'MyNevo' app might be the way forward, although you can only run it in Chrome, but again I can find no way of updating the settings on my Nevo. | Conduit is not standalone but used in conjunction with the ez-rc site. It works fine in Win 10 as does the site. Just go to Knuckx's link in Edge, click the elipses at the top right and Open with Internet Explorer. This should work until the site goes away completely.
Graham said a while back that he could write a firmware update utility. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Mon Dec 19, 2016 3:27 pm Post subject: |
|
|
Not for me I'm afraid. It runs up in IE11 and won't recognise the Nevo. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Mon Dec 19, 2016 3:47 pm Post subject: |
|
|
Then you need to patch the registry:
http://www.hifi-remote.com/wiki/index.php?title=Getting_started_with_Xsight_and_Nevo#Win_8.1.2F10_Requirements
It's easiest to make the changes manually as Win 10 probably won't let you apply the reg files.
EDIT: Well, I can't connect either. Check for updates in the conduit also fails. I think the site is as good as dead.
Can someone in the UK contact OFA and see what the status of EZ-RC and Xsight is? I've contacted OFA in the US and they haven't supported Xsight for quite a while. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Mon Dec 19, 2016 4:07 pm Post subject: |
|
|
Sorry, but I can;t even log in now, it immediately comes back with the "Session Expired" message.
Don't see much point in carrying on with this as it is going to be way beyond the average Slingbox user. So I will wait until the new software is produced. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Mon Dec 19, 2016 4:25 pm Post subject: |
|
|
Agreed. I've ask the mods to move the EZ-RC posts to their own thread anyway.
Seems unlikely that UEI would actually make new software for Xsight/Nevo. But I hope they do.
You do realize Xsight/Nevo still works in Remote Master, right? We just can't pull new upgrades from the UEI database. We have to use the simpleset site for that. |
|
Back to top |
|
|
alanrichey Expert
Joined: 24 Mar 2008 Posts: 3529 Location: UK/USA |
Posted: Mon Dec 19, 2016 4:31 pm Post subject: |
|
|
No, have to admit I had forgotten that |
|
Back to top |
|
|
nohjy
Joined: 23 Jan 2015 Posts: 21
|
|
Back to top |
|
|
vbs_
Joined: 04 Jan 2017 Posts: 36
|
|
Back to top |
|
|
bob187
Joined: 17 May 2017 Posts: 6
|
Posted: Wed May 17, 2017 6:53 pm Post subject: xsight Color |
|
|
Hello all I just bought a xsight color and I don't have a user name and password and wanted to know if someone had one I can use to get my remote updated
Guess it's time to shell out the bucks for a harmany
thank you kindly,
Bob |
|
Back to top |
|
|
Impeeza
Joined: 03 Mar 2016 Posts: 15
|
Posted: Mon May 29, 2017 4:29 pm Post subject: Site non working |
|
|
Hello, the site appears full down, any body knows how update the firmware for new or reseted remotes? |
|
Back to top |
|
|
|