View previous topic :: View next topic |
Author |
Message |
rembeans
Joined: 24 Jun 2016 Posts: 3
|
Posted: Mon Nov 28, 2016 1:58 pm Post subject: Proscan TV/DVD combo (How to use hex codes) |
|
|
I'm trying to program a OARUSB04G remote to work with a proscan tv/dvd combo. My original remote broke, so I cannot get it to learn from the original. I installed remote master and was able to get an extender for the remote, but quickly figured out this didn't help me.
The TV remote works to control everything for the tv. However, the dvd portion is not functional.
I found this website with hex codes for proscan:
http://www.remotecentral.com/cgi-bin/codes/proscan/
However, I don't know how do get the codes to my remote to try it out. Can someone help me get these hex codes into my remote?
Thanks! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon Nov 28, 2016 3:28 pm Post subject: |
|
|
I used IRScrutinizer and Remote Master to create this file for you using the codes posted at the DVD link from the page you linked above.
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=14287
Download the file, go to the Devices tab in RM, New, Open (open the downloaded file), OK, assign to device button (TV?), upload to remote.
If the file doesn't work, then give us more info like the model number of your TV. |
|
Back to top |
|
|
rembeans
Joined: 24 Jun 2016 Posts: 3
|
Posted: Thu Dec 08, 2016 8:51 pm Post subject: |
|
|
Thanks, I'll check this out. |
|
Back to top |
|
|
rembeans
Joined: 24 Jun 2016 Posts: 3
|
Posted: Mon Dec 12, 2016 3:45 pm Post subject: |
|
|
Ok, I gave it a try, but wasn't successful. I downloaded the RMIR file, but wasn't sure how to get it onto the remote. I opened rmir and was trying to install as an extender, but this was not an option with the RMIR file type (had to be a hex). However, when I looked at the settings.bin file for my remote, I was able to open the remote and go in and change a few of the EFC5 codes to match the file you shared. When I uploaded these back to my remote, they did not do anything. I think the codes probably are not the right ones for this combo tv.
My tv model number is PLEDV1945a. The setup code that works for the tv is 3382.
Any suggestions would be awesome. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Mon Dec 12, 2016 5:22 pm Post subject: |
|
|
What step isn't working?
Quote: | go to the Devices tab in RM, New, Open (open the downloaded file), OK, assign to device button (TV?), upload to remote. |
My EFCs aren't compatible with setup code 3382, and your posted hex codes don't even remotely match that setup code either.
I'm surprised the playback commands aren't working if you stay in TV mode. Try using code 3680 for DVD after getting Proscan DVD codes from SimpleSet. |
|
Back to top |
|
|
|