260201 URC-8200BCI-003-R Unable to download or read sig

Peabots · Post by **Peabots** » Fri Sep 16, 2016 1:16 pm

I have a Slate Cleanable Remote that I would like to extend/modify keys on. Internally the remote has URC8200BCI-003-R stamped on the case.

I purchased an FTDI cable from DIYGadgets and have tried IR804, RMIR and JP2Sniffer1_4 to communicate with the device.

In IR804 the driver status returns serial/parallel driver and Delcom driver functioning properly. Check interface returns remote interface check succeeded. Raw download attempt returns JP12 read failed 0.

In RMIR2.03 Build 14 - download from remote returns error downloading from remote. Raw download returns unable to read the signature from the remote.

At this point I wanted to at least verify I am communicating with the remote and found some other threads discussing JP2Sniffer. High Level tab - download from E2 causes JP2Sniffer1-4 to hang. Utilized the Windows 10 Task Manager to end task. Low Level tab - Begin Comm>GetInfo>GetSigBlk returns:

GetSigBlk: 00B000
Processor: MAXQ612

00 00 03 00 03 00 00 03 00 00 03 00 00 00 07 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 07 00 00 07 00 00 07 00 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 00 07 00 00 03 00 00 03 00 00 07 00 00 03 00 00 07 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 07 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 07 00 00 03 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 03 00 00 00 03 00 00 07 00 00 07 00 00 00 03 00 00 07 00 00 03 00 00 03 00 00 03 00 00 00 03 00 00 03 00 00 03 00 00 00 02 51 53 00 02 00 02 00 02 50 52 00 08 00 C3 21 00 00 B0 00 5A 00 08 01 00 00 B0 00 00 3E 87 00 40 00 DF 0F 00 00 00 A0 32 36 30 32 30 31 FF FF FF FF FF FF FF FF 00 FF 00 FF 00 FF FF 00 00 00 FF 00 FF 00 FF FF FF FF FF FF 02 00 00 04 00 00 0E 00 00 00 B0 00 00 00 B0 A0 00 01 2C 00 FF 00 4D

This is a cool remote that I would love to be able to modify. Any help getting RMIR to work with it is greatly appreciated!

Thanks.
John

mdavej · Post by **mdavej** » Fri Sep 16, 2016 2:53 pm

Is this your remote?

http://www.uei.com/product/north-america/slate-cleanable-remote

3FG · Post by **3FG** » Fri Sep 16, 2016 9:41 pm

Recently UEI has been producing remotes with a different memory structure to the one we saw with JP1.4 and JP2 remotes. This remote is the first one with a MAXQ processor which seems to have the new structure. I'm traveling at the moment, but I can work on this in the next few days. In the meantime, try to find out if the remote can accept either macros or keymoves. That will help us to determine the button numbers.

Looks like the remote signature is 263201.

Peabots · Post by **Peabots** » Sat Sep 17, 2016 9:52 am

mdavej wrote:Is this your remote?

http://www.uei.com/product/north-americ ... ble-remote

Yes, the picture that comes up on the main link and the two left pictures below it.

Here is a link to site that has more thorough information.
http://www.urcsupport.com/urc_product/slate-urc8200/

Regards,
John

Peabots · Post by **Peabots** » Sat Sep 17, 2016 10:26 am

3FG wrote: try to find out if the remote can accept either macros or keymoves. That will help us to determine the button numbers..

I am not sure how to verify macros or keymoves other than the documentation. The remote is a learning remote and you can manually program macros. I uploaded the instruction manual which shows these functions.

http://www.hifi-remote.com/forums/dload ... e_id=14203

Please let me know the method to verify the functions if I misunderstood your request.

Thanks.
John

Post by **The Robman** » Tue Dec 03, 2024 1:40 pm

@3FG, Dave, did you create the RDF for this remote? I'm doing some RDF maintenance, mainly for default button names, and noticed that this RDF doesn't have a map, so I was considering creating one. The remote appears to be a single device TV remote, but the RDF has 2 modes and 2 separate power buttons. The UEI page that mdavej linked above does suggest that there's a 2-device version, but I can't find any evidence of that in my searching.

Also, the RDF has sig 260201 whereas you suggested the sig might be 263201 above. Did you find the 2-dev version, perhaps?

Post by **The Robman** » Tue Dec 03, 2024 2:07 pm

Updated RDF with map and image here:
http://www.hifi-remote.com/forums/dload ... e_id=27087

3FG · Post by **3FG** » Tue Dec 03, 2024 2:13 pm

I'll check on this tonight. However, in the first post of this thread the OP used GetSigBlk in JP2Sniffer, and the return was 00 40 00 DF 0F 00 00 00 A0 32 36 30 32 30 31 FF FF FF FF F.....
So definitely the remote used by the OP has signature 260201. I probably just made a typo.